Desa VMH3000TNA installation manual Cleaning and Maintenance, Replacement Parts, Service Hints

Page 19

OWNER’S MANUAL

CLEANING AND MAINTENANCE

WARNING: Turn off heater and let cool before cleaning.

CAUTION: You must keep control areas, burner, and circu- lating air passageways of heater clean. Inspect these areas of heater before each use. Have heater inspected yearly by a quali- fied service person. Heater may need more frequent cleaning due to excessive lint from carpeting, pet hair, bedding material, etc.

CLEANING BURNER INJECTOR HOLDER AND PILOT AIR INLET HOLE

The primary air inlet holes allow the proper amount of air to mix with the gas. This provides a clean burning flame. Keep these holes clear of dust, dirt, lint, and pet hair. Clean these air inlet holes prior to each heating season. Blocked air holes will cre- ate soot. We recommend that you clean the unit every three months during operation and have heater inspected yearly by a quali- fied service person.

We also recommend that you keep the burner tube and pilot assembly clean and free of dust and dirt. To clean these parts we recom- mend using compressed air no greater than 30 PSI. Your local computer store, hard- ware store, or home center may carry com- pressed air in a can. You can use a vacuum cleaner in the blow position. If using com- pressed air in a can, please follow the direc- tions on the can. If you don't follow direc- tions on the can, you could damage the pilot assembly.

1.Shut off the unit, including the pilot. Allow the unit to cool for at least thirty minutes.

2.Inspect burner, pilot, and primary air inlet holes on injector holder for dust and dirt (see Figure 27).

3.Blow air through the ports/slots and holes in the burner.

4.Check the injector holder located at the end of the burner tube again. Remove any large particles of dust, dirt, lint, or pet hairs with a soft cloth or vacuum cleaner nozzle.

5.Blow air into the primary air holes on the injector holder.

6.In case any large clumps of dust have now been pushed into the burner repeat steps 3 and 4.

Clean the pilot assembly also. A yellow tip on the pilot flame indicates dust and dirt in the pilot assembly. There is a small pilot air inlet hole about two inches from where the pilot flame comes out of the pilot assembly (see Figure 28). With the unit off, lightly blow air through the air inlet hole. You may blow through a drinking straw if compressed air is not available.

Ports/Slots

Injector

Holder

Primary Air

Inlet Hole

Burner

Tube

Figure 27 - Injector Holder On Outlet Burner Tube

Pilot Air Inlet Hole

Pilot

Assembly

Figure 28 - Pilot Inlet Air Hole

CABINET

Air Passageways

•Use a vacuum cleaner or pressurized air to clean.

Exterior

•Use a soft cloth dampened with a mild soap and water mixture. Wipe the cabi- net to remove dust.

REPLACEMENT PARTS

Note: Use only original replacement parts. This will protect your warranty coverage for parts replaced under warranty.

PARTS UNDER WARRANTY

Contact authorized dealers of this product. If they can’t supply original replacement part(s), call DESA International’s Techni- cal Service Department at 1-800-323-5190 for referral information.

When calling DESA International, have ready

•your name

•your address

•model and serial numbers of your heater

•how heater was malfunctioning

•type of gas used (propane/LP or natural gas)

•purchase date

Usually, we will ask you to return the defec- tive part to the factory.

PARTS NOT UNDER

WARRANTY

Contact authorized dealers of this product. If they can’t supply original replacement part(s), call DESA International’s Parts Department at 1-800-972-7879 for referral information.

When calling DESA International, have ready

•model number of your heater

•the replacement part number

SERVICE HINTS

When Gas Pressure Is Too Low

•pilot will not stay lit

•burner(s) will have delayed ignition

•heater will not produce specified heat

When Gas Quality Is Bad

•pilot will not stay lit

•burner(s) will produce flames and soot

•heater will backfire when lit

You may feel your gas pressure is too low or gas quality is bad. If so, contact your local natural gas supplier.

107097

19

For more information, visit www.desatech.com

Page 18 Page 20
Image 19
Page 18 Page 20
Contents What to do if YOU Smell GAS OWNER’S Operation and Installation ManualLocal Codes Safety InformationUnpacking AssemblyProduct Features Product IdentificationAssembling and Attaching Brass Trim Attaching Brass Front Trim to Front PanelConfined and Unconfined Space AIR for Combustion and VentilationProviding Adequate Ventilation Unusually Tight ConstructionDetermining FRESH-AIR Flow for Heater Location AIR for Combustion VentilationDetermining if You Have a Confined or Unconfined Space Ventilation Air From Inside Building Ventilation AIRVentilation Air From Outdoors Locating Heater InstallationInstallation Items Check GAS TypeThermostat Sensing Bulb Installation OptionsMounting Heater to Wall Placing Heater On Mounting Bracket Installing Bottom Mounting ScrewsMounting Heater to Optional Hearth Base Mounting Heater on Optional Hearth BaseSecuring Hearth Base to Floor Mounting Heater to Optional Mantel Connecting to GAS SupplyAssembling Mantel Pressure Testing Heater Gas Connections Pressure Testing Gas Supply Piping SystemChecking GAS Connections To Turn OFF GAS To Appliance For Your Safety Read Before LightingOperating Heater Lighting InstructionsPilot Flame Pattern Inspecting BurnerBurner Flame Pattern Observed Problem Possible Cause Remedy TroubleshootingMaintenance, Gas leak. See Warning statement at Replacement Parts Cleaning and MaintenanceService Hints VMH3000TNA Illustrated Parts BreakdownKEY VMH3000TNA Description QTY Parts ListTechnical Service SpecificationsAccessories International Warranty Information

VMH3000TNA specifications

The Desa VMH3000TNA is an advanced heating unit designed for residential and commercial use, providing a reliable source of warmth during colder months. This versatile heater offers a blend of efficiency, modern technology, and user-friendly features, making it a popular choice for consumers seeking comfort and practicality.

One of the standout features of the VMH3000TNA is its high heat output capability. With an impressive heating output of up to 30,000 BTUs, this heater can efficiently warm large spaces, ensuring that any room or area is kept at a comfortable temperature. This makes it an ideal choice for homes, workshops, and even smaller commercial settings.

In terms of technology, the Desa VMH3000TNA is equipped with a reliable electronic ignition system, which eliminates the need for manual lighting and improves overall convenience. This feature is especially beneficial during cold weather, as it ensures quick and effortless operation. Additionally, the heater includes adjustable thermostatic controls, allowing users to set their desired temperature and maintain it with precision.

The heating unit operates using either natural gas or propane, providing flexibility depending on the availability of fuel sources. This adaptability is particularly advantageous for users in remote areas where one fuel type may be more accessible than the other. Furthermore, the VMH3000TNA boasts an energy-efficient design, which helps to reduce operational costs while minimizing environmental impact.

Safety is a critical aspect of the Desa VMH3000TNA's design. It incorporates an automatic shut-off feature, which activates in the event of a malfunction or airflow blockage. This ensures user safety and peace of mind, making it suitable for use in various settings, from homes to commercial spaces. Moreover, the heater is equipped with a durable casing and high-quality components, ensuring longevity and reliability.

Another notable characteristic of this unit is its sleek and contemporary design. The VMH3000TNA features a stylish appearance that can seamlessly fit into a range of interior decors, making it not just a functional appliance but also an aesthetic addition to any room.

In summary, the Desa VMH3000TNA stands out as a powerful, efficient, and user-friendly heating solution. With its high output, modern technologies, versatile fuel options, and safety features, it provides an excellent choice for those seeking dependable heating for their spaces. Whether for a home or a commercial setting, this heater promises to deliver warmth and comfort throughout the cold seasons.
Top Page Image Contents