Basics
•Do not place the device in any areas that may overheat, such as on an electric heating mat.
•Do not store your device near or in heaters, microwaves, hot cooking equipment, or high pressure containers.
•Never use a damaged charger or battery.
Maintaining water and dust resistance
Your device supports water- and
•Do not immerse the device in water deeper than 1.5 m or keep it submerged for more than 30 minutes.
•Ensure that the back cover is tightly closed. Otherwise, it may not provide protection from water and dust.
•Do not expose the device to water moving with force.
•Do not open the device’s covers when the device is in water or in very humid places, such as swimming pools or bathrooms.
•Do not open the back cover using wet hands or when the device is wet.
•The rubber seal fitted to the back cover is an important component of the device. Take care when opening and closing the back cover to avoid damaging the rubber seal. Also, ensure that the rubber seal is free from debris, such as sand or dust to prevent damage to the device.
•If the device is exposed to clean water, dry it thoroughly with a clean, soft cloth. If the device is exposed to other liquids, such as salt water, ionised water, or alcoholic beverage, rinse it with clean water and dry it thoroughly with a clean, soft cloth. If you do not follow these instructions, the device’s performance and appearance may be affected.
•The back cover may be loosened if the device is dropped or receives an impact. Ensure that all the covers are properly aligned and tightly closed.
•If the device has been immersed in water or the microphone or speaker is wet, sound may not be heard clearly during a call. Wipe the device with a dry cloth or dry it thoroughly before using it.
8