Desa B110BT, R110BT, REM110BT owner manual Safety Information, Unpacking, Fueling

Page 2

110,000 Btu/Hr H.S.I. Series

PORTABLE FORCED AIR HEATER

SAFETY

INFORMATION

WARNINGS

IMPORTANT: Read this Owner’s Manual carefully and completely before trying to assemble, oper- ate, or service this heater. Improper use of this heater can cause seri- ous injury or death from burns, fire, explosion, electrical shock, and carbon monoxide poisoning.

DANGER: Carbon monoxide poisoning may lead to death!

Carbon Monoxide Poisoning: Early signs of carbon monoxide poisoning re- semble the flu, with headaches, dizziness, and/or nausea. If you have these signs, the heater may not be working properly. Get fresh air at once! Have heater serviced. Some people are more affected by carbon monoxide than others. These include preg- nant women, persons with heart or lung disease or anemia, those under the influence of alcohol, and those at high altitudes.

Make certain you read and understand all Warnings. Keep this manual for reference. It is your guide to safe and proper operation of this heater.

Use only kerosene or No. 1 fuel oil to avoid risk of fire or explosion. Never use gasoline, naphtha, paint thinners, al- cohol, or other highly flammable fuels.

Fueling

a)Personnel involved with fueling shall be qualified and thoroughly familiar with the manufacturer’s instructions and applicable federal, state, and lo- cal regulations regarding the safe fu-

eling of heating units.

b)Only the type of fuel specified on the heater’s data plate shall be used.

c)All flame, including the pilot light, if any, shall be extinguished and the heater al-

lowed to cool, prior to fueling. d)During fueling, all fuel lines and fuel-

line connections shall be inspected for leaks. Any leaks shall be repaired prior to returning the heater to service.

e)At no time shall more than one day’s supply of heater fuel be stored inside a building in the vicinity of the heater. Bulk fuel storage shall be outside the structure.

f)All fuel storage shall be located a minimum of 25 feet from heaters, torches, welding equipment, and similar sources of ignition (excep- tion: the fuel reservoir integral with

the heater unit).

g)Whenever possible, fuel storage shall be confined to areas where floor pen- etrations do not permit fuel to drip onto or be ignited by a fire at lower elevation.

h)Fuel storage shall be in accordance with the federal, state, or local author- ity having jurisdiction.

Never use heater where gasoline, paint thinner, or other highly flammable va- pors are present.

Follow all local ordinances and codes when using heater.

Heaters used in the vicinity of tarpau- lins, canvas, or similar enclosure mate- rials shall be located a safe distance from such materials. The recommended minimum safe distance is 10 feet. It is further recommended that these enclo- sure materials be of a fire retardant na- ture. These enclosure materials shall be securely fastened to prevent them from igniting or from upsetting the heater due to wind action.

Use only in well-vented areas. Before using heater, provide at least a three- square-foot opening of fresh, outside air for each 100,000 Btu/Hr of rating. This heater produces carbon monoxide, which is listed by the State of Califor- nia as a reproductive toxin under Propo- sition 65.

Use only in places free of flammable vapors or high dust content.

Use only the electrical voltage and fre- quency specified on model plate.

Use only a three-prong, grounded ex- tension cord.

Minimum heater clearances from com- bustibles:

Outlet: 8 Ft. Sides: 4 Ft.

Top: 4 Ft. Rear: 4 Ft.

Locate heater on a stable and level sur- face if heater is hot or running or a fire may occur.

When moving or storing heater, keep heater in a level position or fuel spill- age may occur.

Keep children and animals away from heater.

Unplug heater when not in use.

When used with thermostat, heater may start anytime.

Never use heater in living or sleeping areas.

Never block air inlet (rear) or air outlet (front) of heater.

Never move, handle, refuel, or service a hot, operating, or plugged-in heater.

Never attach duct work to front or rear of heater.

Warning to New York City Residents For Use Only At Construction Sites in accordance with applicable NYC codes under NYCFD certificate of approval #4803, #4899, #4908, #4909, or #4934.

UNPACKING

1.Remove all packing items applied to heater for shipment.

2.Remove all items from carton.

3.Check items for shipping damage. If heater is damaged, promptly inform dealer where you bought heater.

2

104192

Image 2
Contents Portable Forced AIR Heater With BUILT-IN ThermostatFueling Safety InformationUnpacking Tools Needed AssemblyProduct Identification Ventilation FuelsTheory Operation Schedule Preventative MaintenanceStoring TRANSPORTING, or Shipping Troubleshooting Upper Shell Removal Service ProceduresPump Pressure Adjustment FANReplace combustion chamber Fuel FilterIgnitor Nozzle Assembly Fuel and AIR Line Replacement Proper RoutingIgnition Control Assembly Pump RotorWiring Diagram Technical Service SpecificationsIllustrated Parts Breakdown REM110BTParts List KEY Part Number Description QTYWheels and Handle Parts List Parts Available not ShownReplacement Parts AccessoriesWarranty and Repair Service

B110BT, REM110BT, R110BT specifications

Desa REM110BT, B110BT, and R110BT are innovative heating solutions designed to provide efficient warmth and comfort in various settings. These portable electric heaters are perfect for home, workshop, or outdoor use, combining powerful performance with user-friendly features.

One of the standout features of the Desa REM110BT model is its Bluetooth connectivity. This allows users to control the heater remotely via a smartphone app, providing convenient access to settings such as temperature adjustments and timer functions from anywhere within range. This smart technology is designed for modern living, making it easier to maintain a cozy environment without the need to constantly interact with the device directly.

The B110BT model also incorporates Bluetooth technology, enhancing the ease of use further. In addition to the wireless control capabilities, this model provides a robust heating performance with a focus on energy efficiency. It delivers reliable heating power to efficiently warm up small and medium-sized spaces, minimizing electricity costs while maximizing comfort.

The R110BT, on the other hand, is designed for rugged environments and is built to withstand harsher conditions. This model is particularly effective for use in workshops or outdoor settings, where durability is crucial. The R110BT boasts protective housing, making it resistant to impacts and environmental factors, while still offering impressive warmth output.

All three models share common characteristics such as multiple heat settings, which allow users to customize the level of warmth according to their needs. The adjustable thermostats further enhance this customization, providing a range of options from minimal heating to maximum warmth. Safety features are also a priority, with automatic shut-off mechanisms that activate if the heater overheats or is accidentally tipped over, ensuring peace of mind during use.

In terms of portability, Desa has designed these heaters to be lightweight and equipped with ergonomic handles for easy transport. This makes it simple to move the heaters from room to room or take them outdoors for events and gatherings.

In summary, Desa REM110BT, B110BT, and R110BT heaters stand out in the market with their blend of advanced technologies, user-friendly features, and robust performance. Whether for home comfort, workshop efficiency, or outdoor warmth, these models cater to a diverse range of heating needs while prioritizing safety and energy efficiency.