Samsung LW15E13CX/XET manual Connecting Your LCD TV/Monitor, Connecting Computer ➀ ➁ ➂

Page 7

4_LW15E13C-Body3-13p.fm Page 5 Wednesday, August 8, 2001 4:10 PM

Setting up Your LCD TV/Monitor

Connecting Your LCD TV/Monitor

Figure 2. Cable connections

1.Connecting Computer ( ➀ ➁ ➂ )

A.Connect the power cord to the DC Adaptor and connect the adaptor jack to the DC 12V power connector on the back of the monitor.

B.Connect the 15-pin D-SUB of the video signal cable to the PC video connector on the back of the monitor.

C.Connect the stereo audio cable to “Audio (ST)” on the back of the monitor and the other end to “ Audio Out” terminal of the sound card on your computer.

D.If necessary, please install monitor driver contained on the accompanied CD. For driver installation, please refer “Installing Video Driver” section on page 7.

2.Connecting External A/V Devices ( ➃ ➄ )

A.Connect RCA (Yellow) or S-VHS cable to an appropriate external A/V device such as VCR, DVD or camcorder. (RCA cable and S-VHS cable not included)

B.Connect RCA audio cables to “Audio (R)” and “Audio (L)” terminals and the other ends to corresponding audio out terminals on the A/V device. (Stereo-RCA cable not included)

C.Headphone may be connected to the headphone output on the left-hand side of the monitor marked ( ➅). While the headphone is connected, the sound from the built-in speakers will be disabled.

D.The DTV function is not supported in this model.

3.Connecting TV/CATV ( ➆ )

A.Connect an antenna or CATV cable to the antenna terminal on the back of the monitor.

English 5

Image 7

Contents LW15E13C/LW17E14C 1280 x 1024 xTable of Contents Technician should open the case of the LCD monitor Monitor doing so may create the danger of electric shockElectric socket Unpacking Your TV/Monitor Viewing angle Setting up an Ergonomic WorkstationTV/Monitor location Workstation heightConnecting TV/CATV ➆ Connecting Your LCD TV/MonitorConnecting Computer ➀ ➁ ➂ Connecting External A/V Devices ➃ ➄Unplug the DC adapter Isolate the cap of the tuner box Connecting TV Tuner BoxPlug and Play Installing the Video DriverSelf-Test Feature Check Stfc Power IndicatorWarm-up Time Getting HelpUser Controls PowerCH + Automatic Save OSD Lock/Unlock Direct-Access FeaturesUse On Screen Display OSD Accessing the menu systemFunction or to exit from the OSD Beep PositionHalftone DurationSetting bar Main menu Tool Tip PC functions and adjustmentsContrast Brightness Color Image Sharper Handled in several different waysAlso be panned „ Pan Move the zoomed image hotizontally VerticallyPicture-in SoundAs DVD, VCR, TV or PC PIPRegion TV/ Video functions and adjustmentsSET-UP Ways.Perform necessary corrective actions Cancel Use this menu to undo the current job„ Manual TunePicture Active TimerArea By Remote-Control Auto Adjustment Channel search Turn off the OSDPrevious channel Caption USA Only „ Features that can only be accessed via remote controller PowerSaver Troubleshooting Settings Power Saver,Power indicator light Management system Is steady amber or Available mode for yourNo sound Troubleshooting Audio and TVCheck the volume control on Documentation „ Adjust the Treble and Bass toSpeciﬁcations Temperature Operating 10% to 80% Humidity Storage DimensionsWeight Monitor body When foldedHSync Not used Pin D-sub connectorPin Assignments Red Green Green + H/V Sync BlueDisplay Modes Preset timing modesModel Color Sound Stereo Channel Countries Case Attaching a wall or Arm mounting deviceRear cover Mounting pad Installing Vesa compliant mounting devicesWall Mount Instructions Refer to page 33 to fold the baseUnplug the monitor from the power outlet before cleaning Retractable Stand Maintenance of Your LCD TV/MonitorIndex European Notice FCC InformationIC Compliance Notice MPR II CompliancePrinted on recyclable paper