Warranty and Service
| FAQs and troubleshooting |
|
|
| |
EN |
|
|
| ||
|
|
|
|
| |
| A fault may result from a minor error that you can correct yourself with the help of the following | ||||
| instructions.. Do not attempt any further repairs if the following instructions do not help in each | ||||
| specific case.. |
|
|
| |
|
| Warning: Repairs to the appliance are to be performed only by a qualified service | |||
|
| technician.. Improperly effected repairs may result in considerable risk to the user.. If | |||
|
| your appliance needs repair, please contact your customer service centre.. | |||
| What should I do if the cooking zones are not functioning? | ||||
| Check for the following possibilities: | ||||
| • The fuse in the house wiring (fuse box) is intact.. If the fuses trip a number of times, call an | ||||
|
| authorised electrician.. |
|
|
|
| • The appliance is properly switched on.. | ||||
| • The control indicators in the control panel are illuminated.. | ||||
| • The cooking zone is switched on.. | ||||
| • The cooking zones are set at the desired heat settings.. | ||||
| What should I do if the cooking zones will not switch on? | ||||
| Check for the following possibilities: | ||||
| • A period of more than 10 seconds has elapsed between when the On / Off button was actu- | ||||
|
| ated and the desired cooking zone switches on (see the section “Switching the appliance | |||
|
| on”).. |
|
|
|
| • The control panel is partially covered by a damp cloth or liquid.. | ||||
| What should I do if the display except for the residual warmth indicator sud- | ||||
| denly disappears? |
|
|
| |
| This could be a result of one of two possibilities: | ||||
| • The On / Off sensor was accidentally actuated.. | ||||
| • The control panel is partially covered by a damp cloth or liquid.. | ||||
| What should I do if, after the cooking zones have been switched off, residual | ||||
| warmth is not indicated in the display? | ||||
| Check for the following possibility: | ||||
| • The cooking zone was only briefly used and therefore did not become hot enough.. If the | ||||
|
| cooking zone is hot, please call the customer service centre.. | |||
| What should I do if the cooking zone will not switch on or off? | ||||
| This could be due to one of the following possibilities: | ||||
| • The control panel is partially covered by a damp cloth or liquid.. | ||||
| • The child safety lock is on.. |
|
|
| |
| What should I do if the | display is illuminated? | |||
| Check for the following: |
|
|
| |
| • The control panel is partially covered by a damp cloth or liquid.. To reset, press the “On / Off” | ||||
|
| control sensor.. |
|
|
|
|
|
|
|
|
|
|
|
| 22 |
|
|
CTR364T010_SLI_DG68-00082B-01_EN.indd 22
11:39:28