Installing the Hob

	Important: Be sure the new appliance is installed and grounded only by qualiﬁed	EN
	personnel.	EN
	personnel.
	Please observe this instruction. The warranty will not cover any damage that may
	occur as a result of improper installation.
	Technical data is provided at the end of this manual.

Regulations and compliance

This appliance meets the following standards:

•EN 60 335 - 1 and EN 60 335 - 2 - 6, relating to the safety of electrical appliances for house- hold use and similar purposes;

•EN 60350, or DIN 44546 / 44547 / 44548, relating to the operating features of electric cook- ers, hobs, ovens, and grills for household use;

•EN 55014 - 2;

•EN 55014;

•EN 61000 - 3 - 2; and

•EN 61000 - 3 - 3, relating to basic requirements for electromagnetic compatibility (EMC).

This appliance complies with the following EU Directives:

•73 / 23 / EWG dated 19.02.1973 (Low Voltage Directive);

•89 / 336 / EWG dated 03.05.1989 (EMC Directive including Amending Directive 92 / 31 / EWG); and

•93 / 68 / EWG CE Labeling Directive.

Safety instructions for the installer

•A device must be provided in the electrical installation that allows the appliance to be discon- nected from the mains at all poles with a contact opening width of at least 3 mm. Suitable isolation devices include line protecting cut - outs, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors.

•With respect to ﬁre protection, this appliance corresponds to EN 60 335 - 2 - 6. This type of appliance may be installed with a high cupboard or wall on one side.

•Drawers may not be ﬁtted underneath the hob.

•The installation must guarantee shock protection.

•The kitchen unit in which the appliance is ﬁtted must satisfy the stability requirements of DIN 68930.

•For protection against moisture, all cut surfaces are to be sealed with a suitable sealant.

•On tiled work surfaces, the joints in the area where the hob sits must be completely ﬁlled with grout.

•On natural, artiﬁcial stone, or ceramic tops, the snap action springs must be bonded in place with a suitable artiﬁcial resin or mixed adhesive.

•Ensure that the seal is correctly seated against the work surface without any gaps. Additional silicon sealant must not be applied; this would make removal more difﬁcult when servicing.

•The hob must be pressed out from below when removed.

C61RAAST/SLI specifications

The Samsung C61RAAST/SLI is a state-of-the-art air conditioner designed to provide optimal cooling and heating solutions for various environments. Combining functionality, energy efficiency, and advanced technology, this model stands as a leading choice for both residential and commercial use.

One of the standout features of the Samsung C61RAAST/SLI is its inverter technology. This innovation allows the unit to adjust its cooling and heating output according to the ambient temperature, ensuring a consistent climate while significantly reducing energy consumption. The advanced inverter system results in quieter operation and an increase in the lifespan of the air conditioner, making it an environmentally friendly choice with lower utility bills.

In addition to its inverter technology, the C61RAAST/SLI boasts a powerful cooling capacity, making it highly effective in larger spaces. With a high-efficiency rating, it ensures that users experience maximum comfort even during the peak summer months. The unit comes equipped with a Turbo Cooling Mode, which provides a quick chill in intensely hot conditions, allowing users to cool down their space rapidly.

Furthermore, the C61RAAST/SLI integrates advanced filtration systems that not only cool and heat the air but also improve air quality. Equipped with a high-performance filter, it effectively removes dust, allergens, and other particles, ensuring clean and fresh air circulation throughout the space. This feature is especially beneficial for individuals with allergies or respiratory issues.

A user-friendly remote control and smart connectivity options further enhance the convenience of the Samsung C61RAAST/SLI. Users can control temperature settings, fan speed, and operational modes from a distance. Additionally, with compatibility for smart home systems, the unit can be operated via smartphone apps, giving users the ability to manage their air conditioning needs effortlessly.

The sleek design of the C61RAAST/SLI complements any modern interior, with a discreet profile that blends seamlessly into any room. Its low noise level ensures that it operates quietly, which is particularly important for bedrooms or study areas.

In summary, the Samsung C61RAAST/SLI combines cutting-edge technology, energy efficiency, and user-focused features, making it an excellent choice for those seeking a reliable and effective air conditioning solution. With its inverter technology, powerful cooling capacity, advanced filtration, and smart connectivity, it exemplifies the quality and innovation that Samsung products are known for.