Samsung VU10F40SBDD/ML, VU10F40SBDD/EU manual Troubleshooting, Problem Solution

Troubleshooting

Check this list of problems and possible solutions before bringing your vacuum to a service center.

PROBLEM SOLUTION

•Check the electrical plug. Make sure it is fully plugged in.

Vacuum won’t run. • Press the Power on/off button.

•Reset overload protector.

Suction Motor does
not start.	• Allow the vacuum to cool.
Thermal protector
activated.
Brush Motor does not	• Check the brush ON/OFF button.
	• Cut hair or string off the brush.
start.
	• Reset the overload protector.
	• Empty the dust bin.
Vacuum won’t pick up	• Clean the filter and confirm that the filter assembly is positioned
or low suction.	properly.
	• Check the hose connection or flow path.
	• Empty the dust bin.
Dust escaping from	• Clean the pre-motor filters.
the vacuum.	• Clean or replace the exhaust filter.
	• Confirm that the filter assembly is positioned properly.
	• Check inlets, pipe, and dust bin for obstructions.
Cleaner tools won’t	Remove obstruction.
	• Empty the dust bin.
pick-up.
	• Remove and clean the filters.
	• Confirm that the dust bin is locked properly.
The sky blue button
won't return to	• Check the diverter and Push the sky blue button 2~3times to
position after being	check if it works properly. (page26)
pushed.

English - 27