Samsung VCC8870H3B/SML manual Troubleshooting, Problem Solution, Suction, Ones

Page 15

troubleshooting

	PROBLEM	SOLUTION

	Motor does not start	• Check cable, pulg and socket.
	Motor does not start	• Leave to cool.
		• Leave to cool.

	Suction force is gradually	• Check for blockage and remove.
	decreasing

	Cord does not rewind	• Pull the cord out 2-3m and push down the cord rewind
	fully	button.

	Vacuum cleaner does not	• Check hose and replace if required.
	pick up dirt

	Low or decreasing	• Please check ﬁlter and, if required, clean as illustrated in the
	Low or decreasing	instructions. if ﬁlters are out of condition change them to new
	suction
	suction	ones.
		ones.

	Body overheating	• Please check ﬁlters, If required clean as illustrated in the
	Body overheating	instruction.
		instruction.

		• Please decrease power suction.
	Static electicity discharge	• This can also occur when air in the room is very dry.
		Please ventilate the room to air humidity become a normal.

04 TROUBLESHOOTING

troubleshooting _15

Image 15

Contents Please register your product at Vacuum CleanerSafety information Safety InformationOther Symbols Used Important Safeguards Contents For storage, park the ﬂ oor nozzle Assembling the cleanerREMOTE-CONTROL Type Infrared Control Optional Operating the cleanerPower Cord ON/OFF Switch Power ControlBody Volume Type only BodyBODY-CONTROL Type Optional Pipe Using AccessoryAccessory Optional Maintain tools and ﬁ lterParquet Master Brush Option Power PET Plus Brush OptionMaintain Floor Tools Step Brush OptionPET Brush Option Blanket Brush OptionFor improved pick-up of pet hair and ﬁ bre on carpets Throw the dust away Emptying the Dust BINTake the dust bin out by Pushing the buttonCleaning the Dust Pack When to Clean the Dust PackBody Control Cleaning the Dust Pack Cleaning the Outlet Filter Change the Battery OptionalRemove the dust bin and Hepa Filter as shown Ones TroubleshootingProblem Solution SuctionCode No. DJ68-00597G REV0.1