Troubleshooting
Check this list of possible problems and solutions before bringing your vacuum to a service center.
PROBLEM | SOLUTION |
•Check the electrical plug. Make sure it is fully plugged in.
Cleaner won’t run. • Press the Power on/off button.
•Reset the overload protector.
Suction Motor does |
| |
not start. | • Allow the vacuum to cool. | |
Thermal protector | ||
| ||
activated. |
| |
| • Check the power ON/OFF button and the brush ON/OFF | |
Brush Motor does not | button. | |
start. | • Cut hair or string off the brush. | |
| • Reset the overload protector. | |
| • Empty the dust bin. | |
Cleaner won’t pick up | • Clean the filter and confirm that the filter assembly is positioned | |
or low suction. | properly. | |
| • Check the hose connection or flow path. | |
| • Empty the dust bin. | |
Dust escaping from | • Clean the | |
cleaner. | • Clean or replace the exhaust filter. | |
| • Confirm that the filter assembly is positioned properly. | |
Cleaner tools won’t | • Check inlets, pipe, and dust bin for obstructions. | |
Remove obstruction. | ||
• Empty the dust bin. | ||
(Handy vacuum | ||
• Remove and clean the filters. | ||
cleaner) | ||
• Confirm that the dust bin is locked properly. | ||
|