Samsung VU10F70SHDC/SA, VU10F70SHDC/ML manual Troubleshooting, Problem Solution

Troubleshooting

Check this list of possible problems and solutions before bringing your vacuum to a service center.

PROBLEM SOLUTION

•Check the electrical plug. Make sure it is fully plugged in.

Cleaner won’t run. • Press the Power on/off button.

•Reset the overload protector.

Suction Motor does
not start.	• Allow the vacuum to cool.
Thermal protector
activated.
	• Check the power ON/OFF button and the brush ON/OFF
Brush Motor does not	button.
start.	• Cut hair or string off the brush.
	• Reset the overload protector.
	• Empty the dust bin.
Cleaner won’t pick up	• Clean the filter and confirm that the filter assembly is positioned
or low suction.	properly.
	• Check the hose connection or flow path.
	• Empty the dust bin.
Dust escaping from	• Clean the pre-motor filters.
cleaner.	• Clean or replace the exhaust filter.
	• Confirm that the filter assembly is positioned properly.
Cleaner tools won’t	• Check inlets, pipe, and dust bin for obstructions.
	Remove obstruction.
pick-up.
	• Empty the dust bin.
(Handy vacuum
	• Remove and clean the filters.
cleaner)
	• Confirm that the dust bin is locked properly.

English - 28