STEP 4 - Connect the water hose
Connect the water supply hose to the water tap.
1. Remove the adaptor (A) from the water supply hose (B).
A
B
2. Use a Philips screwdriver to loosen four screws on the adaptor.
3. Hold the adaptor and turn part (C) in the arrow direction to loosen it by 5 mm (*).
C
4.Insert the adaptor into the water tap, and tighten the screws while lifting up the adaptor.
5.Turn part (C) in the arrow direction to tighten it.
C
6.While holding down part (E), connect the water supply hose to the adaptor. Then, release part (E). The hose fits into the adaptor with a
clicking sound.
E
02 INSTALLLATION
English - 15
2016/1/30 14:29:09