Samsung WW90H7410EW/KJ manual Information codes, Code Symbol Solution

Information codes

If the washing machine fails to operate, you may see an information code on the screen. Check the table below and try the suggestions.

CODE SYMBOL	SOLUTION
dE	• Make sure the door is firmly closed.
	• Make sure that laundry is not caught in the door.
	• Make sure the source water tap is turned on.
	• Check the water pressure.
4E	• Clean the mesh filters of water hose.
	When the washer displays the “4E” code, the washer do draining for
	3 minutes. During this time, the Power button is inoperative.
	• Clean the debris filter.
5E	• Make sure the drainage hose is installed correctly.
	• Clean the water hose mesh filter.
	• The laundry load is unbalanced. Redistribute the load. If only one item
UE	of clothing needs washing, such as a bathrobe or pair of jeans, the
	final spin result might be unsatisfactory and an “UE” error message will
	be shown in the display window.
cE/3E	• Call the after-sales service.
	• This occurs when too much foaming is detected. It is also displayed
Sd/Sud	while foaming is removed. When the removal is finished, the normal
	cycle proceeds.(This is one of the normal operations. It is an error for
	preventing non-sensing faults.)
	• If the voltage of the supplied power is instable, the washing machine
Uc	will be paused to protect its electric devices.

•If the correct voltage is supplied, the cycle will resume automatically.

If any information code keeps appearing on the screen, contact a local Samsung service center.

06 TROUBLESHOOTING

English - 37

WW90H7410EW-03403J-01_EN.indd 37

2016/2/5 17:05:08