Resetting the headset

Using the headset

List of voice prompts

	Status	Voice prompt*
	When you turn the	“Power on” or “Power off”
	headset on or off	“Power on” or “Power off”
	headset on or off
	When you enter	“Ready to pair. Search for the headset from the Bluetooth menu”
	Pairing mode
	Pairing mode

	When you turn the
	Multi-point feature on	“Multi-point mode is on” or “Multi-point mode is off”
	or off

	When you connect the	“Device is connected” or “Two devices are connected”
	headset to the devices	“Device is connected” or “Two devices are connected”
	headset to the devices
	When you disconnect
	the headset from a	“Device is disconnected”
	device

	When you reject or end	“Call terminated”
	a call	“Call terminated”
	a call

When the headset is paired with a mobile device, it automatically saves connection and feature settings, such as the Bluetooth address or device type of the mobile device.

To reset the connection settings saved in the headset, enter Pairing mode, press and hold both Volume buttons and the Talk button at the same time for 3 seconds. The indicator light flashes violet three times.

When resetting the headset, all connection settings saved in the headset are deleted, and the connection with mobile devices are deleted. To use the headset, pair with mobile devices again.

* Voice prompt content may vary.