Samsung DVD-P191/SAM manual Reference, Firmware upgrade, Introduction, How to make an upgrade disc

Page 29

reference

Firmware upgrade

Introduction

Samsung will often support the software upgrade to improve the performance of this unit to the latest sta- tus, through Samsung Internet Site (www.samsung. com).

Because the specially new mpeg4 codec continues and it is appearing. What improvements are made depends on the upgrade software you are using as well as the software that your DVD-player contained before the upgrade.

How to make an upgrade disc

Write the downloaded file onto a blank CD-R or CD- RW disc, using the following settings:

1.You have to download a new file through Download Center of Samsung Internet Site (www.samsung.com).

2.Write the file to Disc using CD-RW of your computer.

Note

-File System CD-ROM ISO Level

-Character set ISO 9660

-Finalized, single session

-Write speed low

Upgrade procedure

1.Open the disc tray. Place the disc on the tray. Close the tray. The Firmware upgrade screen appears.

2.Press the √/® buttons to select Total, then press the ENTER button.

Firmware upgrade starts

-In the middle of the writing, the tray will open automatically. After taking out the disc, please wait for about 2 minutes.

-If the unit was succesfully updated, the unit will turn off and on after closing the tray automatically. When the unit turns on, this screen will display.

3. Press the number buttons to select the desired language

English

Français

Deutsch

Español

Italiano

Nederlands

Note

-If the “Select Menu Language” doesn’t appear, please contact to “Samsung Service Center”.

-Do not press any button and unplug the power cord during upgrade.

-The upgrade procedure may change, refer to the web site (www.samsung.com).

● REFERECHANGICESETUP MENU

Firmware upgrade

appears on the display

English _29

Image 29

Contents AK68-01778A DVD PlayerSetting up PrecautionsFor your safety DiscBefore YOU Start Table of Contents Progressive Scan Outputs 525p SetupGeneral Features Disc Size Max. Playing Time Characteristics Disc Type and CharacteristicsDisc Markings DivX CertificationFront Panel Display DescriptionFront Panel Controls Component Video OUT Jacks Rear PanelCancel Button Tour of the Remote ControlDisc Menu Button Brings up the Disc menu Bookmark Button Info ButtonConnections Before Connecting the DVD PlayerChoosing a Connection Connection to a TV For VideoConnection to a TV Interlace Connection to a TV Progressive Input Function. supported,And you have to set up the TVTo see the progressive video output Scan isTurn on the DVD player, TV, and Amplifier Using the video signal cables, connectConnection to an Audio System 2 Channel Amplifier Coaxial Cable Playing a Disc Basic functionsBefore Play PlaybackUsing the Display Function Using the Search and SkipUsing the Disc and Title Menu FunctionsSlow Play Repeat PlaySelecting the Audio Language Adjusting the Aspect Ratio EZ ViewAdvanced functions Selecting the Subtitle Language Using the Subtitle button DVDChanging the Camera Angle Depending on the disc, these functions may not workClips Menu for MP3/WMA/ JPEG/ MPEG4/CD Audio Using the Bookmark FunctionUsing the Zoom Function Folder Selection Folder can be selected in Stop or Play modeMP3/WMA/CD Audio Playback Repeat/Random playbackCD-R MP3/WMA file MPEG4 PlaybackMPEG4 Play Function Repeat playbackDivX5 Picture CD PlaybackCD-R AVI file CD-R Jpeg Disc Using the Setup Menu Changing setup menuSetting Up the Language Features Using the Player Menu LanguageUsing the Audio Language Setting Up the Audio OptionsUsing the Subtitle Language Using the DivX Subtitle Language❶ TV Aspect Setting Up the Display Options❷ Screen Messages ❸ Black LevelSetting Up the Rating Level Setting Up the Parental Control❹ TV System ❺ Video OutputChanging the Password How to make an upgrade disc Firmware upgradeUpgrade procedure ReferenceProblem Action TroubleshootingVideo SpecificationsWeight and dimensions are approximate Region AK68-01778A

Related manuals

Manual 100 pages 31.75 Kb

Manual 65 pages 1.66 Kb