![](/images/new-backgrounds/1238312/23831213x1.webp)
02 Connecting the TV to the One Connect
Refer to the following figure and connect the Invisible Connection, supplied as an accessory, between the TV and the One Connect. Be sure to first untie the cable () of the Invisible Connection that is connected to the TV. If you untie the cable ( ) of the Invisible Connection that will be connected to the One Connect, the cable may be entangled or damaged.
1. Connect the connector () of the Invisible Connection to the TV, and then connect the connector ( ) to the One Connect.
2.After connecting the Invisible Connection between the TV and the One Connect, connect their power plugs to power outlets.
One connect
ONE CONNECT
Bending Cover
•• When connecting the Invisible Connection, use a Bending Cover to prevent the cable of the Invisible Connection from being bent at a 90 degree angle. Failure to do so may cause damage to the cable.
•• When connecting the Invisible Connection, pay attention to the shapes of its connectors so that they are connected correctly. Failure to do so may cause product malfunction.
•• After connecting the Invisible Connection, wind the remaining cable around the Invisible Connection tube. Just winding or leaving the remaining cable as it is may cause damage to the cable.
•• When connecting the Invisible Connection, be careful not to twist the cable of the Invisible Connection. Failure to do so may cause performance degradation to the TV or damage to the cable.
•• Be careful not to take the following actions to prevent the Invisible Connection from being damaged:
English
Bending | Twisting | Pulling | Stepping on | Pressing on |
CLASS 1 LASER PRODUCT
•• Caution - Invisible laser radiation when open. Do not stare into beam.
•• Caution - Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
English - 7