setting up your refrigerator
5 
2
Remove 1 cap and 3 screws on the left side of the refrigerator where you will
reattach the left side middle hinge. (Refer to the left picture.) And replace them on the former right side middle hinge position like the right picture. When removing 2 plastic screws, pick them up with tweezers (forceps, nippers, pliers) while turning them with screwdriver(+).
25
1
Replace the freezer door on the left |
|
side bottom hinge. Replace the left |
|
side middle hinge. You can get it from |
|
the installation tool (box) supplied with |
|
your new Samsung refrigerator. And |
|
reattach it by using 1 screw and 2 bolts. |
|
(Should use screwdriver(+) for screw |
|
and wrench for bolts.) | Cover the middle hinge cap. |
8 13
①
Separate the stopper(①) by removing 3 screws on the right side. (Refer to the picture.) And replace them on the right side. Remove 3 screws on the left side. (Refer to the picture.) And then, replace the stopper(①) separated from the right side. And reattach it by using those removed 3 left side screws on the left side.
6 
2
14
7
After removing cap on the upper left side of fridge door, reattach the fridge door on the right side.
6 1
2
3
6 1
Separate the cover on the left upper side of refrigerator by removing 1 screw, and reattach it on the right upper side. (Be careful
not to strip wire coating.)
6
3
Assembl
e the left upper hinge on the left side by using 3 bolts and reattach the ground wire using 1 screw. You can get the hinge from the installation tool
box supplied with your new Samsung refrigerator. (Be careful
not to tip over the fridge door and have wire damage.)
Disassemble 2 connectors (1 and
2),and then assemble 2 connectors (2 and 3).
(If it
is not connected, error message will
be shown on the display)
Replace the left upper hinge cover with using 1 screw. You can get it from the installation tool
box supplied with your new Samsung refrigerator.
Check the door alignment, opening, and inner
lamp operation by opening the fridge and freezer doors.
16_ setting up