Samsung HW-F355/SQ, HW-F355/EN manual Using the Auto Power Link function, Using the Dimmer function

HW-F350		AUTO POWER
	REPEAT		DIMMER
	OPTICAL	USB/	TV SOURCE
HW-F355		AUX
		AUTO POWER SoundShare

REPEAT

Using the AUTO POWER LINK function

The Crystal Surround Air Track is automatically turned on when you turn on the TV or any device connected to the Air Track with the optical cable.

Press AUTO POWER on the remote control of this unit.

• The Auto power link function turns on and off each time you press AUTO POWER.

AUTO POWER LINK	Display
ON	POWER LINK ON
OFF	POWER LINK OFF

ENG

●

HW-F350		AUTO POWER
	REPEAT		DIMMER
	TV VOL	TVCH	AUDIOSYNC
HW-F355	TV MUTE	TV INFO TV PRE-CH DIMMER
	SOUND EFFECT		SMART VOLUME
HW-F350
	TV VOL	TV CH	AUDIOSYNC
HW-F355
	TV MUTE TV INFO TV PRE CH TV EXIT

	LEVEL	MUTE		LEVEL
HW-F350
HW-F355	3D SOUND		VOL	DRC
	PLUS

▪ If a TV or any device connected to Air Track with the optical cable is off and there is no digital input, the Air Track is turned off after 20 minutes.

Using the DIMMER function

This feature control the brightness of the Display.

Press DIMMER on the remote control of this unit.

Each time the button is pressed, the selection changes as follows :

DIMMER ON ➡ DIMMER OFF

Using the AUDIO SYNC function

Video may appear out of synch with the audio if the Air Track is connected to a digital TV. If this occurs, adjust the audio delay time to match the video.

Press AUDIO SYNC +/–. on the remote control of this unit.

•You can use the + , - buttons to set the audio delay time between 0 ms and 300 ms.

▪ In USB mode TV mode or BT mode, the Audio Sync function may not work.

Using the DRC function

This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.

Press DRC on the remote control of this unit.

•Each time the button is pressed, the selection changes as follows :

DRC STANDARD ➡ DRC MAX ➡ DRC MIN

FUNCTIONS

19