The Surround Sound function adds depth and a sense of space to sound.
Surround Each time you press this button, ON and OFF alternate.
| Surround | •• ON : Play sound over all the speakers. |
| •• OFF : You can hear the sound of the original source channel from several speakers. | |
|
| |
|
|
|
SOUND | You can select the desired sound effect by choosing STANDARD, MUSIC, CLEAR VOICE, | |
| MODE | SPORTS, or MOVIE. |
| SOUND MODE | Select the “STANDARD” mode if you want to enjoy the original sound. |
| •• DRC (Dynamic Range Control) | |
|
| |
|
| Lets you apply dynamic range control to Dolby Digital tracks. If you press and hold the |
|
| SOUND MODE button while in standby mode, DRC (Dynamic Range Control) turns on |
|
| or off. With the DRC turned on, loud sound is reduced. (The sound may be distorted.) |
Press to select a source connected to the Soundbar.
•• | BT PAIRING mode |
|
Source | To turn on “BT PAIRING” mode in “BT” mode, press and hold the | (Source) button |
for more than 5 seconds. See page 17 for details. |
| |
|
| |
•• | Auto Power Down Function |
|
| The unit turns off automatically in the following situations. |
|
––D.IN / WIFI / BT / USB Mode : If there is no audio signal for 5 minutes.
––HDMI Mode : If there is no audio signal for 15 minutes.
––AUX Mode :
––If the Audio (AUX) Cable is disconnected for 5 minutes.
––If there is no KEY input for 8 hours when the Audio (AUX) Cable is connected. (Auto Power Down function can be turned off only in that case.)
––To turn off Auto Power Down function, while in “AUX” mode, press and hold the pbutton for 5 seconds.
Press the pbutton to pause a music file temporarily.
If you press the button again, the music file plays.