Advanced Functions
Recording Function
B
You can record sound of the CD, the Radio Broadcasting or sound from the external source into the USB storage device.
1.Switch the system on by pressing the Power button.
2.Connect the external USB storage device you want to record to the USB jack (
) of the main unit
3.Play a Disc, tune to a station or connect the external source to the main unit.
CD
`` Press the F button on the main unit to select the DVD/CD function.
`` Press the OPEN/CLOSE button to open the Disc Compartment.
`` Insert a CD and press the OPEN/CLOSE button to close the Disc Compartment.
`` Use the CD selection ( [ or ] ) button to select the desired song.
Tuner
`` Press the F button on the main unit to select FM. `` Tune to a station you want to record.
External Source
`` Connect an External Component/MP3 player to the main unit.
`` Press the F button to select the AUX input. `` Play a song from the external device.
4.Press the USB REC button to start recording.
CD
`` “TRACK RECORDING” is displayed
and CD recording starts. `` Press and hold the USB REC button
to start recording the all tracks of the Disc.
“FULL CD RECORDING” is displayed.
`` If you play the MP3/WMA file, the file is copied into the USB device totally.
`` To copy a folder, highlight desired folder first and press USB REC button, the folder is copied.
“COPY XX”“COPY END” is displayed. When the recording is done, “STOP” will be displayed.
`` If there is duplicating file name, "FILE EXISTED" is displayed, and the function is canceled.
Tuner/External Source
`` “RECORDING” is displayed.
5.To stop recording, press the STOP ( @ ) button and it automatically creates and saves recorded files in .MP3 format.
`` After the recording, a directory named “RECORDING”(CD), “CD COPY”(MP3 CD), “TUNER RECORDING” or “AUX RECORDING” will be created in your device.
✎✎NOTE
`` Do not disconnect the USB or the AC Cord during the recording as this may cause damage to the file..
`` If you disconnected USB device during a recording, the main unit will be powered off and you may not delete the recorded file. In this case, please connect the USB device to the PC and backup the USB data on the PC first and then format the USB device.
`` When the USB memory has insufficient free space, it will display “NOT ENOUGH MEMORY”.
`` The recording works if the USB device or the HDD is formatted in the FAT file system. (The NTFS file system is not supported.)
`` When you use CD high speed search function, the CD recording doesn't work.
`` Sometimes, the recording time may be longer with some USB devices.
`` The equalizer is set to "OFF" automatically and becomes not available during a CD recording.
`` The REPEAT function is set to "OFF" automatically and becomes not available during a CD recording.
`` If you use the MIC function during the CD recording, the voice from the microphone will be recorded.
`` You can not record the radio when searching or no available station is found in the Tuner mode.
`` Note that setting the input level too loud when recording music from an external device through the AUX and USB channel may cause noise into the recording. In that case, lower the external device’s volume level.
`` Up to 300MB of a video file can be recorded.
Recording Speed
You can select the recording speed before recording.
1.Each time you press the CD REC SPEED button on the remote control, the recording speed will change as following:
RECORD SPD x 1RECORD SPD x 3
`` While the Tuner or External Source is recording, the recording speed does not supported.
`` When you select RECORD SPD x 3, the audio sound will not be output.
✎✎NOTE
`` If you connected the Microphone, you just
have one recording speed mode: RECORD SPD x 1.
`` During recording, if you disconnect the Microphone, the recording will stop, even if you reconnect the Microphone, it will still stop.