Samsung DA-F61/SQ, DA-F60/SQ manual Specifications, Software Upgrade

SPECIFICATIONS

SOFTWARE UPGRADE

Samsung may offer upgrades for the Wireless Audio Portable's system firmware in the future. To upgrade the firmware, visit samsung.com and find your model by name to locate the available download.

Download the firmware file onto a USB drive and follow the below instructions to upgrade the product.

SERVICE

5V 500mA

SERVICE

5V 500mA

AUX IN

-Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.

-Weight and dimensions are approximate.

-For the Power Supply and Power Consumption, refer to the label attached to the product. Open the rear cover to check the label.

✎aptX® : aptX enables high quality Bluetooth stereo audio that delivers wired audio quality wirelessly.

1.Turn on the product.

2.Insert a USB drive containing the firmware upgrade into the Service (USB) port on the back of the product.

3.Press the FUNC. and buttons for 5 seconds at the same time. The update process starts.

•All LEDs indicators will blink during the update process.

4.The LEDs will turn off automatically after the update process is complete.

•Do not disconnect the power or remove the USB drive while upgrades are being applied.

•The product will turn off automatically after completing the firmware upgrade.

•When firmware is upgraded, settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade.

•When the battery indicator LED is red, do not update the product. Doing so could cause the product to malfunction.

✎If the firmware fails to upgrade, we recommend formatting the USB drive in FAT16 and trying again.

✎For upgrading purposes, do not format the USB drive in NTFS format because it is not a supported file system.

✎Depending on the manufacturer, the USB may not be supported.