Samsung MM-DG35T/SAM, MM-DG35T/XSA manual Scan Progressive Scan Function ENG

P.SCAN (Progressive Scan) Function ENG

Unlike regular Interlace Scan, in which two fields of picture information alternate to create the

entirepicture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all lines displayed in one pass) to create a clear and detailed picture without visible scan lines.

You can select "Progressive Scan" or "Interlace Scan" for you TV.

Please go to <Setup><Display Setup><Video Output> and set I-SCAN or P-SCAN. (see the page 39.)

What is Progressive (or Non-Interlaced) Scanning?

Interlaced Scan (1 FRAME = 2 FIELDS) Progressive Scan (FULL FRAME)

In interlaced-scan video, a frame consists of two	The progressive scanning method scans one full frame of
interlaced fields (odd and even), where each field	video consecutively down the screen, line by line.
contains every other horizontal line in the frame.	An entire image is drawn at one time, as opposed to the
The odd field of alternating lines is displayed first, and	interlaced scanning process by which a video image is
then the even field is displayed to fill in the alternating	drawn in a series of passes.
gaps left by the odd field to form a single frame.	The progressive scanning method is desirable for dealing
One frame, displayed every 1/25th of a second, contains	with moving objects.
two interfaced fields, thus a total of 50 fields are
displayed every 1/50th of a second.
The interlaced scanning method is intended for capturing
a still object.

Note	• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that
	support Progressive Video. (It does not work on TVs with conventional component inputs, i.e.,
	non-progressive scan TVs.)

•Depending on the brand and model of your TV, this function may not work.

•Before set the I-SCAN or P-SCAN mode, please disconnect the HDMI cable first.

CONNECTIONS

16