Setting the Clock
| For each step, you have a few seconds to set the required options. | ||
| If you exceed this time, you must start again. | ||
Switch the system on |
| Press TIMER/CLOCK | |
by pressing POWER |
| ||
| twice. | ||
1button. |
| 2 | |
|
| ||
• "CLOCK" is displayed.
ENG
CONNECTIONS
3 Press ENTER. The hour flashes.
•Increase the hours : 
•Decrease the hours : 
When the correct
4 hour is displayed, press ENTER. The minutes flash.
•Increase the minutes : 
•Decrease the minutes : 
5 |
| When the correct |
| time is displayed, | |
| press ENTER. | |
|
|
|
•"TIMER" appears in the display.
•The current time is now set.
Note • You can display the time, even when you are using another function, by pressing
TIMER/CLOCK once.
•You can also use 
on the panel front instead of 
buttons in step 3,4.
14