Samsung AP50Q1CNMID manual Heating Your Room

Page 10

Heating Your Room

You must select the Heat mode if you wish to adjust the :

Heating temperature

Fan speed when heating

1 If necessary, press the (On/Off) button.

Result:The power indicator on the control panel comes on.

The indoor unit beeps.

IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

Switched on

Stopped

lt will start up normally after three minutes.

2 If the is not displayed on the control panel, press the button on the remote control one or more times until it appears.

Result:The indoor unit beeps each time you press the button.

The air conditioner runs in the Heat mode.

Note You can change modes at any time.

3 To adjust the temperature, press the buttons on the remote control or buttons on the control panel one or more times until the required temperature is displayed. Possible temperatures are between 16OC and 30OC inclusive.

Result:Each time you press the buttons: - The temperature is adjusted by 1OC.

- The indoor unit beeps.

The air conditioner starts heating, provided that the room temperature is lower than the selected temperature.

For the first 3~5 minutes, the fan may not operate to prevent the cool air from running out of the indoor unit.

If the room temperature reachs the set temperature, the air conditioner stops heating, but the fan is still operating.

The Defrost indicator( ) appears when frost forms on the outdoor unit and disappears automatically after removing frost.

4Select the fan speed by pressing the button on the remote control

or

button one or more times until the required setting is displayed :

 

Automatic(rotated :

)

 

Low

 

 

 

 

High

 

 

 

Result:Each time you press the button, the indoor unit beeps.

5To control the direction of the air flow, refer to page 16.

Note You can't control the airflow direction when the fan doesn't operate.

E-10

Image 10
Contents USER’S Manual Safety Precautions Contents View of the Unit Indoor UnitOutdoor Unit Remote Control Buttons Getting Started Using the Remote Control Inserting the Remote Control BatteriesUsing the Control Panel on the Indoor Unit Operating PreparationCooling Your Room Heating Your Room Selecting the Automatic Operating Mode Changing the Room Temperature Quickly Operating to the Long Distance Removing Excess Humidity Airing Your Room Adjusting the Air Flow Direction Vertically Adjusting the Air Flow Direction HorizontallySetting the Off Timer To Cancel the Off TimerOther Function Operating Recommendations Topic RecommendationTemperature and Humidity Ranges If the air conditioner is used at ThenCleaning Your Air Conditioner Solving Common Problems Technical Specifications Contact Samsung World Wide