Samsung AQ24EAXSER manual Operating basic function, Turning the AIR Conditioner on and OFF, Auto

Page 14

operating basic function

TURNING THE AIR CONDITIONER ON AND OFF

Press the Power button on the remote control.

You will hear a ringing sound and the air flow blade will move up and down automatically when the air conditioner is properly on.

The air conditioner will operate in the most recent operation mode used or Auto mode.

When you turn off the air conditioner, air flow blade will stop moving and remain closed.

Turning on/off your air conditioner without the remote control.

You can operate your air conditioner by pressing the Power button on the right bottom side of the air conditioner.

SELECTING OPERATION MODE

Auto

In Auto mode, the air conditioner will automatically set the temperature and fan speed depending on the room temperature detected by the room temperature sensor.

1.Turn on the air conditioner.

Press the Power button on the remote control.

2. Set the operating mode.

Press the Mode button on the remote control until Auto mode and Auto fan speed indicator appear on the remote control display.

The air conditioner will automatically set the operation mode to Cool or Heat depends on the room temperature.

Each time you press the Mode button, the mode will change in order of Auto, Cool, Dry, Fan and Heat.

3.Adjust the temperature (if you need to increase or

decrease the room temperature).

Press the Temp or button on the remote control to increase or decrease the desired temperature.

You can set the desired temperature between the range of 16˚C~30˚C.

You can increase/decrease the temperature by 1˚C.

While you are using the remote control, make sure correct indicator which matches your selection appears on the remote control display.

Air flow can be adjusted manually. (See page 19 for instructions.)

14_ operating

AQ09E series_IB_E_30742_2.03.10.indd 14

2010-2-3 14:54:04

Image 14
Contents AQ09E seriesIBE307422.03.10.indd 2010-2-3 Look for Everywhere Cool Summer OfferCost Efficient System FunctionImportant safety symbols and precautions Safety informationSafety Information DeathEnsure no water gets into the air conditioner Potential risk of injury or electric shock Do not open the front grille during operation Insufficient ventilation may result in poor performance Potential risk of fire or loss of property Contents Checking the Indoor Unit and Display PowerViewing your air conditioner Main partsOpening the Front Panel Power button, Room temperature sensorPower button Checking the Outdoor UnitChecking the Remote Control Inserting the batteries Remote control displayUsing the remote control Turning the AIR Conditioner on and OFF Selecting Operation ModeOperating basic function AutoSet the temperature CoolDry Fan Heat Horizontal air flow Adjusting the AIR Flow DirectionVertical air flow To deactivate Turbo function Using advanced functionsUsing the Turbo Function To deactivate the On timer Setting TimerOn timer Off timer To deactivate the Off timerPreset time of On Timer is shorter than Off Timer Combining On timer and Off timerTo deactivate the timer combination Preset time of On Timer is longer than Off TimerMode Wake up from mode Temperature changes in modeTo deactivate mode Using the Smart Saver Function To deactivate the Smart Saver functionUsing the Evaporator Clean Function Using the Filter Reset Cleaning and maintaining the air conditionerCleaning the Exterior Cleaning the Filter Air filterBio filter Replacing the Filter Deodorizing filterType Description Every Once a Maintaining Your AIR ConditionerPeriodical checks Months YearInternal protections via the unit control system Type DescriptionTroubleshooting AppendixOperation Ranges CoolingQuestions or COMMENTS? Air Conditioner
Related manuals
Manual 39 pages 53.41 Kb Manual 37 pages 58.67 Kb Manual 30 pages 11.29 Kb Manual 1 pages 22.85 Kb Manual 30 pages 22.01 Kb