Samsung AQ18VWAXSER, AQ12VBANSEU manual Operating Your Air Conditioner Without the Remote Control

Operating Your Air Conditioner Without the Remote Control

You can operate your air conditioner directly without the remote control.
1 To turn the air conditioner on, press the ON/OFF switch on the right
side of the indoor unit.
Result:	 The Operation indicator on the indoor unit lights up.
	 The indoor unit beeps.
	 The air conditioner starts up in the appropriate mode for the
	room temperature. The air conditioner changes the Cool or
	Heat mode automatically depending on the current
	temperature during operation.
	Room Temperature	Operating Mode
	Lower than 24°C	Heating
	Higher than 24°C	Cooling
2 To turn the air conditioner off, press the On/Off button again.
Note	Even if you turned the air conditioner on with the On/Off button,
	you can control it with the remote control.

Selecting MPI (Micro Plasma Ion) Mode

The Micro Plasma Ion mode creates strong purified zone by decomposing harmful particles in the behavior of active hydrogen(H) and oxygen ion(O₂). The MPI mode can be selected whether the air conditioner is turned on or not.

1 Press the button.

The air conditioner starts up in MPI-Auto mode automatically. The MPI mode also runs when the air conditioner is turned on.  By pressing thebutton again, the MPI mode is canceled.

2 Press theto select the MPI operation types.

Whenever press thebutton, Auto, Silence and Rapid will appear repeatedly.

Auto: Controls the fan speed automatically

Silence: Purifies the indoor air with silence

Rapid: Purifies the indoor air quickly

Note If MPI mode is turned on when the air conditioner runs,

- You cannot select the MPI operation types by pressing

thebutton. The MPI mode runs only in Auto.

- The MPI mode will also stop by pressing thebutton of the panel.

E-24