Selecting the Auto Mode
You can select the Auto mode if you want to cool or heat your room automatically. You can adjust the temperature in this mode.
1If necessary, press the 
(On/Off) button.
Result: ◆ The operation indicator on the indoor unit lights up.
◆The air conditioner starts up in the mode you selected last.
◆The indoor unit beeps.
2 Press the 
button on the remote control until 
is displayed.
Result: | ◆ The indoor unit beeps each time you press the | button. |
◆The air conditioner runs in the Auto mode.
◆The Auto mode cools or heats the room depending on
the set temperature.
◆ The air conditioner changes the Cool or Heat mode automatically depending on the current temperature during operation.
Note You can change modes at any time.
3 Press the 
button to adjust the temperature until the required temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result: ◆ Each time you press the 
button:
-The temperature is adjusted by 1°C
-The indoor unit beeps
◆ The fan speed is adjusted automatically.
◆ 2 fan speed indicators increase and decrease continuously and turn round.
Control Panel