Safety Controls, Warranty Summary | PVI Industries PV 6813 specification

SPECIFICATION FOR DOMESTIC WATER HEATERS

Condensing Gas Water Heater with Stainless Steel Tank

Safety Controls

The heater will be equipped with the following:

•electronic flame monitoring with pre-purge

•electronic temperature control with digital temperature readout

•two immersion temperature limiting devices

•an ASME and AGA-rated temperature and pressure relief valve

•and options as selected on standard and optional equipment document PV 6811

Warranty Summary

Storage tank will be covered by a seven-year warranty covering manufacturing or material defects, leaks and /or the production of rusty water. Tank coverage will include failure due to scale buildup with no provision or condition for maintenance or inspections and no limitations on water chemistry.

Heat exchanger and combustion chamber will be covered by a five-year warranty covering manufacturing or material defects, leaks, and/or the production of rusty water.

Burner and all heater parts will be covered by a one-year warranty.

Initiation and /or continuation of warranty coverage will not be dependent upon annual inspections, regular replacement of anode rods, or water chemistry.

The entire heater will have a first year service policy, which will cover replacement labor and freight costs under certain conditions. Complete copies of all warranties and service policies; including all exclusions and conditions, will be presented to the owner as part of the submittal package.

Finishing

The storage and heating sections will be completely factory packaged, requiring only job site hookup to utilities, venting, and plumbing. The heater will be insulated, jacketed with a corrosion-resistant polyethylene jacket, and mounted on heavy-duty channel skids. The heater will fit properly in the space provided and installation will conform to all local, state, and national codes. UL listing will allow alcove installation and one-inch clearance from combustible materials.

Start Up

Start up on the unit will be performed by factory trained and authorized personnel. A copy of the start up report will be provided to the owner.

Quality Certification and Safety Standards

The heater will have an independent test laboratory listing to safety standard ANSI Z21.10.3/ CSA 4.3. The water heaters will be manufactured by a company that has achieved certification to the ISO 9001 International Quality System.

PV 6813 5/07

PV 6813 specifications

PVI Industries is known for its innovative approaches to creating robust, high-performance products, and the PV 6813 model is a testament to this prowess in engineering. The PV 6813 is a cutting-edge photovoltaic (PV) module designed to meet the increasing demands for efficient solar energy solutions.

One of the standout features of the PV 6813 is its high conversion efficiency. With an impressive efficiency rate commonly exceeding 20%, it enables more sunlight to be converted into usable electricity, making it a prime choice for both residential and commercial applications. This efficiency is achieved through advanced monocrystalline solar cell technology, which maximizes the amount of absorbed sunlight while minimizing losses.

Durability is another key characteristic of the PV 6813. The module is built to withstand harsh environmental conditions, featuring robust framing and tempered glass that ensures resistance to hail, high winds, and other potential damage. This ensures a longer lifespan and reliability in energy production, adding to the overall cost-effectiveness of the installation over time.

The design of the PV 6813 module incorporates innovative technologies such as a half-cut cell configuration, which enhances performance in low-light conditions and reduces shade losses. This technology allows for improved thermal management, leading to better overall performance in various weather conditions.

Furthermore, the PV 6813 is equipped with a comprehensive monitoring system that enables users to track energy production in real time. This feature enhances the understanding of energy consumption, enabling more efficient management of resources.

Installation is simplified with the PV 6813, as its lightweight design and standard dimensions allow for flexible mounting options. This versatility ensures that users can easily integrate these modules into various solar setups, whether on rooftops or ground-mounted systems.

In summary, the PVI Industries PV 6813 stands out in the market with its combination of high efficiency, durability, advanced technologies, and user-friendly features. Ideal for those looking to optimize their solar energy systems, the PV 6813 is a forward-thinking solution that supports sustainable energy goals while offering outstanding performance and reliability. Choosing this module represents an investment in quality and innovation, powering homes and businesses towards a greener future.