N T R O L S a N D C O N N E C T I O N S

C O N T R O L S A N D C O N N E C T I O N S

FRONT PANEL

(2)

(3) (7)

(1)(5)

1. POWER SWITCH

To turn the unit ON or OFF, press the upper or lower portion of this button. Before turning on the amplifier, check all connections and turn down the level controls. A momentary muting is normal when turning the amplifier on or off.

(Caution: Always turn on your power amplifier last, after all your other connected equipment, and always turn off your power amplifier before your other connected equipment.)

2. POWER LED INDICATOR

This LED illuminates when the power is turned “ON”.

3. SUBWOOFER LEVEL CONTROL

This controls the level of the signal for the Subwoofer channel. The actual voltage gain is shown in dB. Turn the level down (counterclockwise) if the Clipping LEDs (6) illuminate steadily (indicating too strong an output signal).

4.CHANNEL 1 & 2 LEVEL CONTROLS These control the level of channel 1 & 2.

5.SIGNAL LED INDICATORS

These LEDs illuminate to confirm the presence of an input signal greater than 110mV on that channel of the amplifier.

(4)

(6)(7)

(6)(5)

6.CLIP (PEAK) LED INDICATORS

These LEDs illuminate if the corresponding channel’s output is within 3dB of clipping. Occasional blinking of the LEDs is acceptable, but if they remain on more than intermittently you should turn down either the power amplifier’s level controls or reduce the output level of the preceding component to avoid audible distortion.

[Caution: Prolonged use at levels in excess of clipping can cause damage to your speakers and even the internal amplifier. Carefully monitor the clipping LEDs to avoid prolonged clipping.]

7. PROTECT LED INDICATORS

These LEDs illuminate if the power amplifier’s safety circuit has been triggered to shut off the outputs. This can occur if the output connection has been shorted, the load impedance is too low, there is DC voltage at the outputs, or if the power amp overheats due to excessive clipping. When either of these LEDs is lit up, turn OFF the power and check the output connections to verify that they are correct. If the output connections are shorted, or a speaker is blown, correct the problem (or unplug the speaker) and try turning the amp back on. It’s also prudent to carefully feel if the amplifier is very hot due to excessive clipping. If so, allow the amp to cool down before turning the power back on.

3WA1700 specifications

Nady Systems has built a reputation in the wireless audio technology arena, and one of its standout offerings is the 3WA1700 wireless microphone system. The 3WA1700 is designed to cater to a variety of performance settings, including live sound venues, houses of worship, and corporate events. Its robust features, advanced technology, and user-friendly characteristics make it a compelling choice for both professionals and amateurs alike.

At the heart of the 3WA1700 system is its reliable UHF (Ultra High Frequency) wireless technology. Operating in the 1700 MHz frequency band, this system minimizes interference and offers superior sound quality, ensuring that users can perform without the interruptions commonly found in other wireless systems. This is particularly advantageous in crowded areas with multiple devices vying for frequency space, as the 3WA1700 maintains a stable signal even in challenging environments.

The 3WA1700 also employs a diversity reception system that enhances signal reliability and minimizes dropouts. This technology utilizes two antennas to receive incoming signals, automatically switching between them to ensure a consistent connection. This feature is particularly valuable for performers who need the freedom to move around the stage without fear of audio loss.

Another significant aspect of the 3WA1700 is its user-friendly design. The system features a clear LCD display on the receiver that provides vital information such as battery life, signal strength, and frequency settings. This intuitive interface allows users to make adjustments quickly and efficiently, making it easy to transition between different audio settings as needed.

In terms of versatility, the 3WA1700 comes equipped with multiple microphone options, including handheld, lavalier, and headworn microphones. This diversity allows users to select the microphone type that best suits their performance needs. The handheld microphone is particularly noted for its durability and high-quality capsule, which captures vocals with clarity and precision.

Furthermore, the 3WA1700 supports a substantial operating range, providing solid performance up to 300 feet, allowing performers the freedom to engage with their audience without being tethered to a fixed position. The long battery life ensures extended use, enabling users to focus on their performance without frequent interruptions for battery changes.

In conclusion, the Nady Systems 3WA1700 wireless microphone system is an impressive amalgamation of cutting-edge technology, user-centered design, and high-quality audio performance. Its frequency agility, diversity reception, and multiple microphone options make it a top choice for anyone looking to elevate their audio experience in live settings.