PVI Industries PV500-12 manual General Information

Page 15

TURBOPOWER 99WATER HEATER

10GENERAL INFORMATION

10.1Temperature and Pressure Relief Valve(s)

Pipe the relief valve discharge to a suitable open drain. The drain pipe may not be smaller than the relief valve opening and must be secured to prevent it from lifting out of the drain under discharge pressure. Do not install valves or restrictions in the discharge line.

10.2Lower LED Readout

An adjustable digital operating control is located in the front control panel. The control is factory pre-set at approximately 120ºF.To adjust the setpoint to deliver the desired water temperature, press and release the Set 1 key on the face of the control. When setpoint adjustment is enabled, use the arrow keys to adjust the set point to the desired system temperature. See TempTrac Electronic Controller Panel in this manual for more information.

10.3High Water Temperature Limit Control

Appliances are equipped with adjustable limit and fixed high limit controls to control the maximum discharge water temperature. These controls are located inside the control cabinet. The high limit control is optionally available as the manual reset type and may be reset by pressing the limit reset button accessible through the control panel cover. The adjustable limit is of the auto reset type and can be dial adjusted to operate just above the set point of the main operating temperature control. Pressing the reset on the high limit control will not cause the control to reset until the water temperature has dropped below the set point of the manual reset high limit control.

WARNING: Turn off all electrical service to the appliance when accessing the limit or high limit controls located inside the control cabinet. This cabinet contains High Voltage wiring and terminals. If the electrical service is not turned off and these terminals are touched, a dangerous shock causing personal injury or loss of life could occur. Close and fasten the control cabinet cover before restoring electrical service to the appliance.

10.4Cathodic Protection

PVI water heaters do not utilize cathodic protection. However, in hot water systems utilizing cathodic protection, hydrogen gas can be produced when the hot water system has not been used for a long period of time (generally two weeks or more). Hydrogen gas is extremely flammable. To prevent the possibility of injury under these conditions, one of the hot water system faucets should be opened for several minutes before using any electrical device connected to the hot water system. If hydrogen is present, there will be an unusual sound such as air escaping through the pipe as the hot water begins to flow. Do not smoke, have open flames or turn electrical switches on or off near the faucet at the time it is open.

10.5Thermal Expansion

A relief valve that discharges periodically may be due to thermal expansion in a closed system, such as water heaters or hot water supply boilers installed in a system closed by components, such as a backflow preventer or check valve in the cold water supply or a closed boiler heating loop. These systems must be provided with means to control expansion. Contact a water heater or plumbing professional to resolve this situation. Do not plug the relief valve.

15

PV500-12 08/12

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Installation & Maintenance Manual Table of Contents Turbopower 99 Water HeaterProduct Safety Information Safety ConsiderationsImportant Safety Note Product Description Water Heater Installation Standard Features and EquipmentInstallation Service ClearancesClearances to Combustible Surfaces Combustion and Ventilation AIR Condensation Neutralization and DisposalVent Pipe Fittings Equivalent in feet Vertical and Horizontal Remote AIRVertical or Horizontal Remote Air Option Remote Air Piping DesignVenting Products of Combustion Horizontal and Vertical Venting Through a Wall or Roof Vertical Venting and Outside Combustion Air Horizontal Venting and Outside Combustion AirSingle Unit Installation Suggested Pipe Size GAS Supply and PipingConvert Fittings to Equivalent Straight Pipe Gas Connection Multiple Unit Installations GAS Piping Size ChartPipe Size 100 125 150 175 200 Appliance Isolation during Gas Supply Piping Pressure TestGeneral Information Clock Temptrac Electronic Controller PanelSET DownTo View the Setpoint To Change the SetpointTo Change Other Parameters LED Display Alarm Messages Remote Connections Terminal Strip START-UP Procedure Periodic Maintenance Diagrams Wiring Diagram Burner Diagram Model Number Serial Number Installation Date Turbopower 99 Water Heater

PV500-12 specifications

PVI Industries has established itself as a leader in innovative power generation solutions, and the PV500-12 is a prime example of its cutting-edge technology. Designed for heavy-duty applications, the PV500-12 is a versatile power generator that excels in various sectors, including construction, agriculture, and emergency power supply.

At the core of the PV500-12 is its robust engine, delivering impressive performance and reliability. With a rated output of 500 kVA, this generator can handle significant electrical loads, making it suitable for demanding environments. The engine is engineered for efficiency, ensuring lower fuel consumption while maximizing output. This is a crucial feature as it translates into reduced operating costs and a lower environmental impact, aligning with the growing emphasis on sustainability in power generation.

One of the standout features of the PV500-12 is its advanced control system. Equipped with a user-friendly digital control panel, operators can easily monitor and manage performance metrics, including voltage, frequency, and engine parameters. The integration of remote monitoring capabilities further enhances operational efficiency, allowing for real-time diagnostics and performance tracking from a distance. This feature is particularly beneficial for businesses that require constant power supply and need to ensure their systems are functioning optimally.

The generator is designed with durability in mind, featuring a heavy-duty construction that can withstand harsh operating conditions. Its weatherproof enclosure protects internal components from the elements, making it suitable for outdoor installations. Additionally, the PV500-12 is equipped with advanced noise reduction technologies, ensuring quieter operation compared to traditional generators. This makes it an ideal choice for urban environments or noise-sensitive applications.

In terms of fuel options, the PV500-12 offers flexibility, supporting both diesel and natural gas configurations. This versatility allows users to select the most economical and practical fuel source for their specific needs. The generator's maintenance features have also been streamlined, with easy access points for routine servicing, helping to minimize downtime and keep operations running smoothly.

Overall, the PVI Industries PV500-12 stands out as a robust, efficient, and technologically advanced power generation solution. Its combination of high performance, durability, and user-friendly features make it a valuable asset for various industrial applications. As industries continue to evolve, the PV500-12 positions itself as a reliable partner in meeting the ever-growing demand for dependable power solutions.
Top Page Image Contents