Cool
In Cool mode, the air conditioner will cool your room. You can adjust the temperature and the fan speed to feel cooler in hot season.
1. Turn on the air conditioner.
Press the Power 
button on the remote control.
2.Set the operating mode.
Press the Mode button on the remote control until Cool mode indicator appears on the remote control display.
The air conditioner operates in Cool mode and it will lower the temperature in your room.
When you press the Mode button, mode will change in order of Auto, Cool, Dry, Fan and Heat.
3.Set the temperature.
Press the Temp U or V button on the remote control to increase or decrease the desired temperature.
You can set the desired temperature between the range of 16˚C~30˚C.
You can increase/decrease the temperature by 1 ˚C
4.Set the fan speed.
Press the Fan Y or Z button on the remote control to set the desired fan speed.
If room temperature reaches desired value, the air conditioner will shut off cooling for a while and just the fan runs.
When you press the Fan Y or Z button, fan speed will change in order of Auto, Low, Medium and High.
tWhen you are using the remote control, make sure correct indicator which matches your
selection appears on the remote control display.
tAir flow can be adjusted manually. (See page 19 for instructions.)
t If current outside temperatures are much higher than the selected indoor temperature, it may take time to bring the inner temperature to the desired coolness.
ENGLISH
operating _15