[VG-SWD1000-CIS-IB]Rev1.2L04.indb 3
•To start settings mode
1. | Connect the USB power cable while holding down the button on | English |
2. | Hold the button down until the red LED flashes. | |
| the back of the |
|
3. | As soon as settings mode starts, the red LED flashes and the VG- |
|
| SWD1000 releases the SSID |
|
•To establish a wireless connection between the VG- SWD1000 and laptop
1.After the
2.Fill in the security key field with the key found on the label on the
The red LED will light up on the
3.Open a web browser on the laptop. The
4.Use the settings window to customize the settings. Refer to help for details.
5.After configuring the required settings, click the restart icon or connect a power supply. The
Initial Settings
If the device does not function properly or the settings are not correct, press and hold the button for at least seven seconds when the blue LED flashes. The