Advanced Functions
USB Function
Playing Media Files using the USB Host Feature
You can enjoy media files such as pictures, movies and music saved on an MP3 player, USB memory stick or digital camera in high quality video with 5.1 channel sound by connecting the storage device to the USB port of the product.
MIC 1 
MIC 2
1.Connect the USB device to the USB port on the front panel of the product.
2.Press the FUNCTION button to select USB.
•USB appears on the display screen and then disappears.
3.Press the ◄► buttons to select Videos, Music or Photo.
-Select a file to play.
Safe USB Removal
To prevent damage to the memory stored in the USB device, perform safe removal before disconnecting the USB cable.
•Press the YELLOW(C) button.
- REMOVE will appear on the display.
•Remove the USB cable.
✎NOTE
To listen to your music files with 5.1 channel sound, you must set the Dolby Pro Logic II mode to Matrix. (See page 33)
Remove the USB cable from the USB port slowly. Otherwise, it may cause damage to the USB port.
CD Ripping
B
Converts audio sound of the CDDA (Compact Disc Digital Audio) into a MP3 file format before sending to a USB storage device.
1.Connect the USB device to your product.
2.Insert the CDDA disc into the CD tray. CD RIPPING
3. Press the CD RIPPING button.
• To start ripping the current track, press the CD RIPPING button on
the remote control while the system
is playing a track or stopped temporarily.
•To rip the entire CD, press and hold the CD RIPPING button on the remote control.
4.Press the STOP () button to stop ripping.
•When the CD ripping is done, a directory named "RIPPING" will be created in the USB device and the ripped file will be saved in a format of
✎NOTE
Do not disconnect the USB connection or the power cable during the CD ripping. Otherwise, it may cause damage to the data. To stop CD ripping, press the STOP button and disconnect the USB device after the system stops playing the CD completely.
If you disconnect the USB connection during the CD ripping, the system will turn off and you will not be able to delete the ripped file.
If you connect the USB device to the system while it is playing a CD, the system stops temporarily and will play again.
If the ripping duration is less than 5 seconds, a ripping file may not be created.
CD ripping works only if the USB device is formatted in the FAT file system. (The NTFS file system is not supported.)
For a list of compliant devices, refer to the specification of the USB host.
The ripping is performed at a normal speed of x3. The ripping time may be longer with some USB devices.
While the system is ripping a CD, the audio sound will not be output.
Do not put touch or move the system while it is ripping a CD.
When HDMI AUDIO is set to On, the CD Ripping function is not supported.
05 Advanced Functions