Samsung LT22C350EXQ/RU, LT19C350EXQ/RU manual Speaker Settings, Additional Settings, Reset Sound

Basic Features

Speaker Settings

Menu → Sound → Speaker Settings

•• Auto Volume

Because each station has its own broadcasting conditions, the volume may fluctuate each time you change the channel. This feature automatically adjusts the volume of a channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

✎✎To use the volume control of a connected source device, set Auto Volume to Off. A change to the volume control of the connected source device may not be applied if Auto Volume is set to Normal or Night.

Additional Settings

(digital channels only)

•• DTV Audio Level (MPEG / HE-AAC): This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level.

✎✎According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB. ✎✎To increase or decrease the volume, adjust between the range 0 and -10 respectively.

•• Dolby Digital Comp (Line / RF): This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).

✎✎ Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time.

Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB.

RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB.

Reset Sound

Menu → Sound → Reset Sound

Reset all sound settings to the factory defaults.

Selecting the Sound Mode t

When you set to Dual fg, the current sound mode is displayed on the screen.

✎✎If the Stereo signal is weak and an automatic switching, occurs, then switch to the Mono. ✎✎Only activated in stereo sound signal.

✎✎Only available when the input Source is set to TV.

English - 38