Samsung VP-L905D/XEV manual Playback

ENGLISH

Playing back the Tape

Notes:

■VP-L900/L906/L907 feature a monaural audio system.

If your TV or VCR are stereo, connect the audio cable to the input “L” of TV or VCR.

■In case of VP-L900/L906/L907, you can use an S-VIDEO cable to obtain better quality of pictures if you have a S-VIDEO connector on your TV.

■Close the LCD panel while viewing playback on a TV screen in order to avoid picture distortion.

Playback

1.Use the TV/VIDEO button to select VIDEO on your TV.

2.	Connect a power source (battery or AC Power Adapter) to the camcorder.
	Set the power switch to PLAYER mode.
3.	Insert the tape you want to watch.			PLAYER
	■	Make sure that STOP is displayed.
4.	Press the		(PLAY/STILL) button.	PLAY/STILL
	■	The picture should appear on the TV after 2 to 3 seconds.

■ Press ■ (STOP) to stop playing.

■ If the tape reaches its end during playback, the tape will rewind automatically.

Notes:

■Vibration from the built-in speaker can cause picture distortion.

■It is best to turn the built-in speaker off when your camcorder is connected to the TV.

■The playback system (Hi8/8mm) is selected automatically, depending on the tape format.

■VP-L900/L906/L907 can playback both Hi8 and 8mm.

■This camcorder does not support LP recording and playback.

54 54