Master Lock B70, B30, B100, B150 owner manual Unpacking, Assembly, Tools Needed

Page 5

UNPACKING

1.

Remove all packing items applied to heater for shipment.

 

2.

Remove all items from carton.

 

3.

Check items for any shipping damage. If heater is damaged, promptly inform

 

 

dealer where you bought heater.

ASSEMBLY

These models are furnished with wheels and handles. Wheels, handles, and the

(For 90,000 and 150,000

mounting hardware are found in the shipping carton.

Tools Needed

BTU/Hr Models Only)

 

• Medium Phillips Screwdriver

 

• 3/8" Open or Adjustable Wrench

 

• Hammer

 

1.

Slide axle through wheel support frame. Install wheels on axle.

 

 

IMPORTANT: When installing wheels, point extended hub of wheels toward

 

 

wheel support frame (see Figure 4).

 

2.

Place cap nuts on axle ends. Gently tap with hammer to secure.

 

3.

Place heater on wheel support frame. Make sure air inlet end (rear) of heater is

 

 

over wheels. Line up holes on fuel tank flange with holes on wheel support

 

 

frame.

 

4.

Place front handle and rear handle on top of fuel tank flange. Insert screws

 

 

through handles, fuel tank flange, and wheel support frame. Attach nut finger

 

 

tight after each screw is inserted.

 

5.

After all screws are inserted, tighten nuts firmly.

 

 

Front

 

 

Handle

Hot Air

Screw

 

Outlet

 

Rear

 

 

 

 

Handle

Fuel

 

Air

 

Inlet

Tank

 

 

 

Flange

 

 

Wheel

 

 

Support

 

 

Frame

 

 

Wheel

Nut

 

Cap Nut

 

Extended

 

Axle

Hub

 

ASSEMBLY, EURO

PFA/PV 018A

Figure 4 - Wheel and Handle Assembly, 90/150,000 BTU/Hr Models Only

5

100743

Image 5
Contents Portable Forced AIR Heaters Contents Carbon monoxide poisoning may lead to death Safety InformationIdentification ProductTools Needed AssemblyUnpacking Fuels TheoryOperation Electricity VentilationSupply To Start HeaterStorage Preventative MaintenanceSchedule To Stop HeaterHow Often How To Trouble ShootingFuel Filter Service ProceduresUpper Shell Removal Remove side cover screws using 5/16 nut-driver Spark Plug Removal, 30,000 BTU/Hr Model Spark PlugSpark Plug Removal, 70/90/150,000 BTU/Hr Models Lint Filters Pump Pressure AdjustmentAir Output, Air Intake Removing Air and Fuel Line Hoses, 30,000 BTU/Hr Model NozzleRemoving Burner Head, 70/90,000 BTU/Hr Models Remove upper shell see Rotor Location, 30/70,000 BTU/Hr Models Pump RotorImportant Remove fan Fan240V/50Hz Wiring DiagramsWhite Accessories Wheels Illustrated Parts Breakdown30,000 BTU/Hr KEY Part Number Description QTY Parts List70,000 BTU/Hr Burner Head AssemblyFHPF3-2C 90,000 BTU/Hr M27694 Adjusting Screw 078918-01 Terminal Board Tab Cap 150,000 BTU/Hr IllustratedNPC-4C Certificate of General Equipment Limited 90 DAY Warranty Warranty and Repair Service

B100, B70, B150, B30 specifications

Master Lock has long been synonymous with security and reliability, and their line of locks, including the B30, B70, B150, and B100, exemplify these qualities. Each model is designed to cater to specific security needs while incorporating advanced technologies and features that set them apart in the market.

The Master Lock B30 is a resilient padlock designed for general outdoor use. Featuring a sturdy brass body and an advanced weather-resistant design, the B30 ensures durability in various environmental conditions. Its hardened steel shackle offers additional protection against cutting and sawing attacks, making it suitable for securing gates, sheds, and storage units. The lock comes with a keyway that is easy to operate, while its compact size means it is also lightweight – very convenient for everyday carry applications.

Next in line is the Master Lock B70, which is known for its solid construction and versatility. This padlock boasts a laminated steel body that provides enhanced strength and effectiveness against physical attacks. It features a 7-pin cylinder to offer superior pick resistance, making it a trusted choice for securing residential and commercial properties alike. The B70 also has a weatherproof design, ensuring it performs well even in harsh weather conditions, while its nylon-coated shackle adds an additional layer of protection against corrosion.

The Master Lock B150 stands out with its distinct combination of security and ease of use. Equipped with a durable zinc body and a 3/8-inch shackle, this lock provides robust resistance against tampering and environmental wear. The B150 utilizes a four-digit combination mechanism, allowing users to set and reset their own personalized codes, making it a favorite among those who prefer keyless convenience. The resettable design increases its versatility for different applications, from lockers to toolboxes.

Finally, the Master Lock B100 combines security and style. With a sleek design, the B100 is made of a zinc body and a robust shackle that resists cutting and sawing. Its four-digit combination locking mechanism provides an efficient level of security while ensuring ease of access. Additionally, the B100 is designed for both indoor and outdoor applications, making it an excellent choice for doors, storage containers, and more.

Together, the Master Lock B30, B70, B150, and B100 showcase the brand's dedication to providing reliable security solutions, featuring durable materials, advanced design elements, and user-friendly features tailored to meet diverse security needs. Whether for personal or professional use, these locks highlight the balance of strength and practicality that Master Lock is known for.