Nady Systems manual Specifications, Encore I Overall System Performance

Page 9

38

 

44

36

43

37

41

 

45

39

40

42

36XLR Connector – Connects microphone to the transmitter module for signal input

37Locking Ring – Locks microphone to the transmitter

38Optional Pouch – For lavalier bodypack operation (with beltclip and strap ring for securing)

39Gain Control Switch – Adjusts the input sensitivity (LO or HI)

40Low Battery LED – Single flash (power on), lit steady (low battery)

41Power Switch - Turns the power ON/STANDBY/OFF. In standby position, the power is on and the audio is off.

42Phantom Power ON/OFF Switch – Turns the phantom power ON/OFF

43Battery Compartment

44Release Button – Press to release XLR connector

459V Alkaline Battery

 

SPECIFICATIONS

ENCORE I OVERALL SYSTEM PERFORMANCE

Frequency Response

25-20,000 Hz, +/-3dB

Dynamic Range

120dB

Total Harmonic Distortion

< 0.3%

RF Carrier Frequency Range

169-216 MHz

Frequency Stability

+/- 0.005%, crystal controlled

Modulation

FM (F3E), +/-20KHz max.

Operating Range

Up to 250 ft. typical (depending on site

 

conditions); up to 500+ feet optimum

 

line-of-sight

TRANSMITTERS

 

Audio Inputs

 

•WHT-15

Nady DM-10D neodymium dynamic cartridge

•WLT-15/WGT-15

3.5mm mono locking jack for connecting to omni

 

or unidirectional lavalier mic or unidirectional

 

head worn mic, with phantom power (WLT-15);

•LINK 2™

or connecting to instrument cable (WGT-15)

Locking XLR jack for connecting to microphone or

Controls

cable, with selectable phantom power

 

•WHT-15

OFF/STANDBY/ON switch

•WLT-15/WGT-15

OFF/STANDBY/ON switch, input level adjust

•LINK 2™

OFF/STANDBY/ON, LO/HI Level, and ON/OFF

LED Indicator

Phantom power switch

Unit "ON" (single flash),

RF Power Out

Low Battery Alert (steady)

50mW (Max. allowed by FCC)

Harmonic & Spurious Emissions

> –40dB

Battery

9V Alkaline

Battery Life

Up to 15 hours

Dimensions

 

•WHT-15

9.5" X 1.4" Diam. (24.1 X 3.5 cm)

•WLT-15/WGT-15

4.1" X 2.4"X 0.8" (10.4 X 6.1 X 2.0 cm)

•LINK 2™

4.5" X 1.5" X 1.25" (11.4 X 3.8 X 3.2 cm)

Weight (w/o battery)

 

•WHT-15

6.9 oz (193 g)

•WLT-15/WGT-15

3.6 oz (101 g)

•LINK 2™

2.6 oz (71 g)

 

 

 

 

16

17

Image 9
Contents VHF Wireless Microphone System Contents Using this ManualIntroduction Encore I Receiver System FeaturesVolume WHT-15 Handheld Microphone Transmitter Opening Battery Compartment WGT-15 Instrument Bodypack Transmitter Microphone Operation Link 2 PLUG-IN TransmitterEncore I Overall System Performance SpecificationsEncore I Receiver ServiceNady SYSTEMS, INC

Encore I specifications

The Nady Systems Encore I represents a significant advancement in wireless microphone technology, delivering clarity and reliability to both performers and presenters. Designed with versatility in mind, the Encore I is suitable for a wide range of applications, including live performances, conferences, and educational settings.

One of the main features of the Encore I is its UHF (Ultra High Frequency) operation. With a frequency range that typically spans from 600 to 700 MHz, it provides better sound quality and reduced interference compared to VHF systems. The UHF transmission allows for a broader selection of channels, making it easier for users to find a clear frequency in crowded environments, which is a common challenge in today’s wireless landscape.

The Encore I also boasts a simple yet effective automatic frequency scanning feature. This technology scans the available frequencies and selects the best one to minimize dropouts and interference. This ensures that the user can focus on their performance without worrying about technical difficulties. The system supports multiple channels, allowing for multi-channel setups with multiple performers.

Another standout characteristic of the Encore I is its rugged build quality. Designed for the rigors of frequent use, the microphone and receiver are constructed to withstand the demands of touring musicians and event hosts alike. The handheld microphone features a high-quality dynamic capsule that captures sound accurately while minimizing feedback and handling noise.

The Encore I also includes an integrated LED indicator for battery status, providing real-time notifications to users about power levels. This preventative measure is crucial for performances, allowing artists to replace or recharge batteries before they run out.

Furthermore, the system offers a range of up to 300 feet in open spaces, providing freedom of movement, which is essential for dynamic performances. The compact and lightweight receiver can be easily mounted or placed on a tabletop, facilitating quick setups in various environments.

Overall, the Nady Systems Encore I stands out due to its robust features, user-friendly operation, and reliable performance. Whether for live stage applications or intimate gatherings, this wireless microphone system delivers exceptional audio fidelity and ease of use, making it an excellent choice for anyone in need of quality sound reinforcement.