Contents | NewAir ACP-1300E instruction

ACP-1300E Portable Air Conditioner

Owner's Manual

Please read all instructions carefully before operating

	Contents
1.Safety Instructions
(1)	Warning	2
(2)	Precautions	3
(3)	Maintenance	4
2. Parts List
(1) ACP-1300E Unit and Accessories		5
(2)	Control Panel	6
(3)	Remote Control	7
3.Operating Instructions
(1)	Operating the ACP-1300E for the First Time; Operating Modes;
	and Thermostat	8
(2)	Setting the Timer	9
(3) Adjusting the Airflow		9
(4)	Installing the Battery for the Remote Control	10
(5)	Emptying the Auxiliary Water Tank	11-12
(6)	Setting up the Exhaust Hose	13-14
4. Troubleshooting Tips		15
5. Electrical Diagram		16
6. Electrical Specifications		17

1. Safety Instructions

Warning

Connect the ACP-1300E's plug into an		Do not turn off the power supply by pulling
appropriate power outlet.		the power cord; use the On/Off power
		button.

Be careful not to damage the power		Do not use a power strip or an extension
cord, and do not operate the ACP-1300E		cord.
if the cord appears to be damaged.

Before operating the ACP-1300E,		To avoid injury, keep fingers and foreign
make sure your hands are clean and dry.		objects out of the unit.

Make sure the air conditioner's ground		If you notice smoke or an odd odor coming
wire is connected.		from the ACP-1300E, turn the unit off and
		disconnect the power plug.

If problems persist or if the unit malfunctions, please contact your NewAir dealer or a professional repair center.

1. Safety Instructions

Precautions

Leave the ACP-1300E in an upright position for at least two hours before operating.

The unit must be installed in accordance with national and local wiring regulations.

The ACP-1300E's supply cord requires a Y-type attachment. If the supply cord is damaged, it must be replaced by the manufacturer, an authorized service agent, or a qualified repair professional in order to avoid further damage, to prevent voiding the warranty, and to avoid bodily injury.

Never operate the ACP-1300E in an area where flammable gasses or chemicals are present.

To prevent electromagnetic interference, place the unit at least three feet away from radios or televisions.

When connecting or disconnecting the power cord, hold the plug itself - never pull the power cord.

When not using the unit for an extended period of time, disconnect the power cord and drain any water from the auxiliary water tank.

When cleaning the ACP-1300E, do not spray liquid directly onto the unit. Moreover, do not use harsh chemicals or cleansers to clean the unit. Instead, apply water or a mild cleanser to a soft cloth and wipe the ACP-1300E clean.

The ACP-1300E is not intended to support heavy objects, be used as a step-stool, or be shaken or bumped into. Keep this in mind when deciding where to place the unit.

If you choose to use the continuous drain function on the ACP-1300E, make sure the condensate can drain off into an appropriate receptacle.

To ensure adequate air circulation, place the air conditioner at least four inches away from walls and furnishings. Be aware of draperies or other items which may interfere with the intake vents and cause restricted airflow.

Place the ACP-1300E on a level, flat surface. Do not operate the unit on an angle of more than 4 inches.