Miele S 4002 manual Before using, To reduce the risk of fire, electric shock or injury

Page 3

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

WARNING-

To reduce the risk of fire, electric shock or injury:

Before using

Check the voltage rating of the vacuum cleaner before connecting the power cord to an electrical outlet. Your power source should correspond with the voltage rating plate located on the underside of the vacuum. Use only household AC outlets. Never use DC power sources. If you are not sure of your home’s voltage supply, consult a qualified electrician. Connecting the vacuum cleaner to a higher voltage than indicated in these instructions may result in damage to the vacuum cleaner or injury.

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not alter the plug in any way.

A damaged vacuum cleaner can be dangerous. Check the packaging, vacuum cleaner and accessories for any signs of damage. Do not use a damaged appliance.

Do not use with a damaged cord or plug. If the appliance is not working as it should, has been dropped, damaged, left outdoors or submerged in water, bring it to a service center.

The electrical outlet must be fitted with a 15 A fuse.

3

Image 3

Contents Operating instructions Vacuum cleaner 4002 Contents To reduce the risk of fire, electric shock or injury Before usingUse Using accessories Disposal Cleaning, maintenance and repairsFCC and Industry Canada information Save These InstructionsGuide to the machine Guide to the machine Removing the suction hose Before using the vacuum cleanerConnecting the handpiece and telescopic wand Attaching the suction hoseAdjusting the telescopic wand Adjusting the XXL telescopic wandInserting the fitted wand Attaching the floor tool/brush Accessory clip Using the included accessoriesFloor tool SBD Floor brush SBBCrevice nozzle Upholstery nozzleDust brush with natural bristles Unwinding Power cordOperation Turning the vacuum on and offModels with radio frequency controls While vacuuming Adjusting the suctionRotary selector + / controls+ / at the radio handpiece Opening the air inlet valve Transport and storage Park-SystemTransport and storage Maintenance and care Purchasing new dustbags and filtersWhich dustbags and filters are the right ones? When to change the dustbag Checking the airflow indicatorHow the airflow indicator works Replacing the dustbag Air Clean filter ActiveAirClean or the Active Hepa filterReplacing the exhaust filter Exhaust filter change indicator Replacing the Air Clean filter Resetting the filter change indicator Exchanging exhaust filters Replacing the dust compartment filter motor protection When to change the dust compartment filter motor protectionWhen to change the radio handpiece battery How to change the radio handpiece batteryServicing the floor roller of the SBD 450-3 floor tool Replacing the thread catchersCleaning and care Vacuum cleaner and accessoriesDust compartment After sales service Frequently asked questionsOptional accessories Turbobrush Turbo ComfortHand Turbobrush Turbo Mini Floor brush Parquet Twister XL with swiveling head Floor brush Hardfloor 3Floor brush Parquet Floor brush Parquet Twister with swiveling headUniversal brush Dust brush with natural bristlesRadiator brush Crevice nozzle 12 300 mm Mattress toolMicroSet CarClean Set PlusActiveAirClean filter Active Hepa FilterFilter frame Caring for the environment Disposal of the packing materialsDisposing of the dustbag and filters Page Page Page Alteration rights reserved/0410 Nr 368 440