INSTALLING THE WATER DISPENSER LINE
Attach the purifier lock stations.
-Hold the purifier lock stations in the appropriate position (under the sink for example) and fix it tightly into place where to screw.
TWO PURIFIER LOCK STATION
TWO PURIFIER LOCK
STATION
WATER TUBE
Secure the purifier in position.
- Fix the purifier in position, as shown in the figure
on the right.
PURIFIER
TIGHTENING BAND
PURIFIER
LOCK STATIONS
Connect the water line to the refrigerator. | WATER LINE | CONNECTION NUT |
| ||
|
| |
- Remove the compressor cover of the refrigerator. |
|
|
- Connect the water line to the valve, as shown in the |
|
|
- When connected, check if there is any leakage. |
|
|
If any, repeat the connection. |
|
|
- Reattach the compressor cover of the refrigerator. |
| COMPRESSOR COVER OF |
|
| REFRIGERATOR |
Secure the water line.
CLIP A
- Using clip ”A”, fix the water line to the wall (the back of refrigerator).
- When the water line is secure, make sure whether the waterWATER LINE line is not excessively bent, pinched or squashed.
INSTALLATION INSTRUCTIONS
31