Miele HS08 Selecting the suction power setting, Rotary selector see fig, +/- Controls see fig

en

Selecting the suction power setting

You can adjust the suction power to suit your preference.

Rotary selector (see fig. 15)

￿Turn the suction power selector to the desired setting.

PremiumLine Models (see fig. 16)

￿"Automatic" button

￿+/- controls, to set the desired suction power setting

￿￿ "Thermo" indicator

￿Blockage protection indicator

￿Service indicator (reset button)

￿"Carpet" indicator, the Powerbrush was turned on using the Carpet/Floor button on the hand piece.

+/- Controls (see fig. 17)

The symbols on the control panel indicate what each setting is recommended for:

￿curtains, lightweight fabrics

￿upholstery, cushions

￿thick pile carpets, rugs and runners

￿energy saving, daily vacuuming with low noise level

￿low pile carpets

￿hard flooring and intensive cleaning of carpets.

￿To select a higher power setting, press the + button.

￿To select a lower power setting, press the - button.

The selected power level is displayed with a yellow light.

"Automatic" setting (see fig. 18)

(models with +/- controls)

If the "Automatic" setting is selected, the vacuum cleaner will automatically adjust the suction power level to suit the surface being cleaned.

￿Press the "Automatic" button. The button lights yellow.

To deactivate the setting, press the "Automatic" button again.

￿Do not use the this setting to vacuum draperies or other lightweight fabrics. Excessive suction may cause damage.

Note (see fig. 19):

To adjust to changing floor heights, e.g. carpet edges, thresholds, etc., briefly step on the release button to raise the front of the vacuum cleaner.

11