Installing Your Microwave Oven Setting the Time

Installing Your Microwave Oven

Setting the Time

GB	Place the oven on a flat, level surface that strong enough to safely bear
	the weight of the oven.

Your microwave oven has an inbuilt clock. The time can be displayed in either the 24-hour or 12-hour notation. You must set the clock:

20cm	10cm
above	behind
85cm of	10cm
the floor	on the side

1.When you install your oven, make sure there is adequate ventilation for your oven by leaving at least 10 cm (4 inches) of space behind and, on the sides of the oven and 20 cm (8 inches) of space above and 85 cm(thirty three inches) of the floor.

2.Remove all packing materials inside the oven. Install the roller ring and turntable.

Check that the turntable rotates freely.

3.This microwave oven has to be positioned so that plug is accessible.

•When you first install your microwave oven

•After a power failure

✉Do not forget to reset the clock when you switch to and from summer and winter time.

1. To display the time	Then press the
in the...	button...
24-hour notation	Once
12-hour notation	Twice

2. Turn the dial knob to set hour.

❉Never block the air vents as the oven may overheat and automatically switch itself off. It will remain inoperable until it has cooled sufficiently.

❉For your personal safety, plug the cable into a 3-pin, 230 Volt, 50Hz, AC earthed socket. If the power cable of this appliance is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

❉Do not install the microwave oven in hot or damp surroundings like next to a traditional oven or radiator. The power supply specifications of the oven must be respected and any extension cable used must be of the same standard as the power cable supplied with the oven. Wipe the interior and the door seal with a damp cloth before using your microwave oven for the first time.

3.	Press the	button.
4.	Turn the dial knob to set minute.
5.	Press the	button.