Miele Guide to Using the Beater Bar Selector for Optimal Cleaning

F) BEATER BAR SELECTOR

When cleaning carpeted floor, slide the selector to the “BEATER BAR” position. To stop the beater bar while using accessories, slide the selector to the “STOP” position.

NOTE: The vacuum cleaner should be running when changing the position of the BEATER BAR SELECTOR.

BEATER BAR ON OR OFF

R	E	R		A		B
		T
			A		E
						B

P	O	T
			S

G)HOW TO USE THE ACCESSORIES

1)To use the accessories keep the vacuum cleaner upright and slide the BEATER BAR SELECTOR to

the “STOP” position.

2) Pull the hose out of the intake port a the lower left of the vacuum, and release it from the hose clip. Connect the desired accessory as illustrated below.

3) When finished using the accessory, re-insert the hose end into the intake port and place the hose under the clip. The accessories can also be returned to their storage locations.

Hose clip

CAUTION: While using the accessories, hold the handle as shown above to avoid pulling the cleaner over.

6