Cover-Dome Exchange Procedure

1Loosen 4 screws fixed to the case top with an L shaped wrench to detach the case top.

2Loosen the screw of the rubber safety assembled to the case top to detach the rubber safety.

3Loosen 5 screws fixed to the bracket gasket to detach it.

4Detach the gasket fixed to the case dome part.

5Insert the detached gasket dome into the exchanged cover dome and assemble it in the reverse order of disassembly.

Caution

•Impose more than 10kg of torque as regulated, or waterproof cannot be guaranteed.

•If you don’t assemble the rubber safety to the case top, it may fall to be damaged while you detach the case top.