Remote Channel, Source, Delay, Sound

HIGH DEFINITION A/V SCALER FOR HDMI CONFIGURATION

OSD (ON SCREEN DISPLAY) CONTINUED

Remote Channel

Sets the remote channel for use with the RMT-SR-IR remote control. If the selected channel in this menu and does not match the channel set in the RMT-SR-IR remote, the unit will cease to respond to IR commands from the remote.

• Selectable remote channel from 1 to 4 (default is 1)

AUDIO

Press OK to begin adjusting settings. Use the LEFT and RIGHT buttons to change settings. Press the OK button once the desired settings are made.

Source

Sets the audio source for current input.

Options for Composite:

•L/R1 - Composite analog audio input (default) Options for S-Video:

•L/R2 - S-Video analog audio input (default) Options for Component:

•L/R3 - Component analog audio input (default) Options for HDMI 1:

•HDMI1 - HDMI 1 internal audio (default)

•Optical1 - Optical input 1

•Coaxial1* - SPDIF input 1

Options for HDMI 2:

•HDMI2 - HDMI 2 internal audio (default)

•Optical2 - Optical input 2

•Coaxial2* - SPDIF input 2

Delay

Sets the audio delay for lip syncing correction.

•Off - No delay (default)

•40ms - 40 millisecond audio offset

•110ms - 110 millisecond audio offset

•150ms - 150 millisecond audio offset

Sound

Select general audio output function

•On - Use selected audio source (default)

•Mute - No sound output

Linear SCALER-2-1080P Remote Channel, Source, Delay, Sound, Coaxial is also know as Spdif