Specifications, Ventilation, Contents | Mr. Heater MH35LPTS specification

SPECIFICATIONS

MODEL NO.	....... MH35LPTS
GAS TYPE	LP-Gas
MAX. INLET
PRESSURE	27.5 in. w.c.
MIN. INLET
PRESSURE	27.5 in. w.c.
MANIFOLD
PRESSURE	25.5 in. w.c.

Do not exceed the gas supply pressures shown on rating plate for Model MH35LPTS. The maximum inlet gas supply pressure and the minimum inlet gas supply pressure (for purposes of input adjustment) for LP-Gas are shown as follows:

WARNING

DO NOT EXCEED 27.5” W.C. (1.0 p.s.i.) INLET PRESSURE TO HEATER.

VENTILATION

WARNING

THIS APPLIANCE IS UNVENTED AND MUST BE USED ONLY IN A WELL VENTILATED AREA.

The flow of combustion and ventilation air must not be obstructed. DO NOT use in a tightly enclosed area. Any combustion process requires and consumes oxygen, and may produce carbon monoxide. This heater must be operated with adequate ventilation. Two openings directly to the outdoors must be provided, one low and one high, preferably on opposite sides of the area to be heated. Each of these openings must provide at least three square inches of combustion air-intake area and exhaust outlet area for every 1000 BTUs per hour of heater input rate in order to complete the combustion/ventilation process. Provide additional ventilation for any additional fuel-burning appliances and/or additional occupants.

CLEARANCE (Minimum clearances to combustible materials)

MODEL NO.	BTU/HR RATING		NORMAL OPERATING		CLEARANCES TO
	TYPE GAS		POSTION		COMBUSTIBLES

	NATURAL	LP & NG		TOP	SIDES	BACK	FRONT

MH35LPTS		35,000*	VERTICAL	40”	40”	0”	54”

*Tank size and tank temperature can directly affect BTU output

CONTENTS
Installation Instructions	3
Location	3
Piping	3
Operating Instructions	4
Lighting and Shut Down	4
Maintenance Instructions	5
Replacement Parts List	6
Service and Parts Ordering Information	8

FOR YOUR SAFETY

Do not use this heater in a space where gasoline or other liquids having flammable vapors are stored or used.

The heater is designed and approved for use as a construction heater under ANSI Z83.7 / CGA 2.14 - 2000

We cannot anticipate every use which may be made of our heaters. CHECK WITH YOUR LOCAL FIRE SAFETY AUTHORITY IF YOU HAVE QUESTIONS ABOUT APPLICATIONS.

Other standards govern the use of fuel gases and heat producing products in specific applications. Your local authority can advise you about these.

This appliance is intended to be used primarily for the heating of buildings under construction, alteration or repair.

THE STATE OF CALIFORNIA REQUIRES THE FOLLOWING WARNING:

WARNING

Combustion by-products produced when using this product contain carbon monoxide, a chemical known to the State of California to cause cancer and birth defects (or other reproductive harm).

Mr. Heater Gas-Fired Infra-Red Portable Construction Heater

Operating Instructions and Owner’s Manual

MH35LPTS specifications

The Mr. Heater MH35LPTS is a powerful and versatile portable propane heater designed for both indoor and outdoor use. It is particularly favored by those who require a reliable heating source in various settings, including garages, workshops, camping sites, and during emergencies. With its blend of functionality and ease of use, the MH35LPTS has become a popular choice among consumers looking for efficient heating solutions.

One of the key features of the MH35LPTS is its impressive heating capacity, producing up to 35,000 BTUs per hour. This makes it capable of warming spaces of up to 800 square feet, ensuring that users can maintain a comfortable environment even in colder conditions. Operating on a standard 20 lb. propane tank, the heater is not only efficient but also cost-effective, as propane tends to be a more affordable fuel option compared to electric heating systems.

The Mr. Heater MH35LPTS incorporates advanced safety features, including an automatic low oxygen shut-off system (ODS) and a tip-over safety shut-off valve. These safety mechanisms ensure that the heater will turn off automatically if oxygen levels drop too low or if the unit is accidentally knocked over, providing peace of mind for users, especially when using the heater indoors.

Another significant characteristic of the MH35LPTS is its ease of portability. With a lightweight design and a built-in carry handle, the heater can be easily moved from one location to another, making it ideal for various applications. Whether you need warmth for a construction site or comfort during a camping trip, this heater can be transported with minimal effort.

The heater also features an adjustable heat setting, allowing users to customize the temperature according to their preferences. The straightforward control mechanism ensures that even those who are not familiar with heating equipment can easily operate it.

In summary, the Mr. Heater MH35LPTS is an excellent choice for anyone in need of a reliable and efficient heating solution. With its robust heating capacity, essential safety features, portable design, and user-friendly controls, this propane heater effectively meets the demands of both indoor and outdoor use. Whether for work or leisure, the MH35LPTS stands out as a dependable option for generating warmth when it is needed the most.

SPECIFICATIONS

VENTILATION

CONTENTS

FOR YOUR SAFETY

MH35LPTS specifications