General

200 Series radiant heaters are designed to provide supple- mental heat in small areas such as offices and may be used as an under desk heater. However, care must be taken to avoid blocking heater or covering it with any thing that could allow it to build up heat – See warnings.

INSTALLATION INSTRUCTIONS

This heater operates in vertical position only. For mounting heater to desk, apply velcro to top of heater back, one piece near each comer. Remove backing from back of vel- cro and press firmly against the desired position on the desk. Normal position is vertical against the desk knee- well panel with the top of the heater at knee height. To remove, pull bottom of heater firmly away from desk. Heater can be restored to original position by once again attaching to velcro. the leg on the back swings out to sup- port the heater when used as a portable heater.

INSTRUCTIONS FOR USE AND CARE

Heaters are provided with flexible cord with a polarized 2 blade plug (as shown in Figure 1) and built-in ON/OFF switch. This heater is for use at l20 volt AC only.

Heaters may be cleaned using a damp cloth or sponge and a mild detergent. Never submerge or soak heater in water. Heaters may be repainted if desired. Use only high temperature water based acrylic paints.

Always unplug heaters when not in use. When heaters are not to be used for an extended period of time, cord should be coiled and tied to prevent damage and heater should be stored in a safe location.

If heater fails to operate or if heater or power cord becomes damaged, unplug and discontinue use. DO NOT attempt to repair the heater. If the heater fails during the warranty period, return to place of purchase or to the fac- tory as outlined in the LIMITED WARRANTY STATEMENT below.

Occasionally a new heater will emit a slight “new smell” odor during initial use. This smell should dissipate within the first hour of use.

Figure 1

LIMITED WARRANTY

All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year from date of installation, except heat- ing elements which are warranted against defects in workmanship and materials for five years from date of installation. This warranty does not apply to damage from acci- dent, misuse, or alteration; nor where the connected voltage is more than 5% above the nameplate voltage; nor to equipment improperly installed or wired or maintained in violation of the product’s installation instructions. All claims for warranty work must be accompanied by proof of the date of installation.

The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs, and shipping costs incurred to return products to Marley Engineered Products Service Center. Within the limitations of this warranty, inoperative units should be returned to the nearest Marley authorized service center or the Marley Engineered Products Service Center, and we will repair or replace, at our option, at no charge to you with return freight paid by Marley. It is agreed that such repair or replacement is the exclusive remedy available from Marley Engineered Products.

THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE AFORESAID EXPRESSED WARRANTIES ARE HEREBY DISCLAIMED AND EXCLUDED FROM THIS AGREEMENT. MARLEY ENGINEERED PRODUCTS SHALL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES ARISING WITH RESPECT TO THE PRODUCT, WHETHER BASED UPON NEGLIGENCE, TORT, STRICT LIABILITY, OR CONTRACT.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

For the address of your nearest authorized service center, contact Marley Engineered Products in Bennettsville, SC, at 1-800-642-4328. Merchandise returned to the facto- ry must be accompanied by a return authorization and service identification tag, both available from Marley Engineered Products. When requesting return authorization, include all catalog numbers shown on the products.

HOW TO OBTAIN WARRANTY SERVICE AND

WARRANTY PARTS PLUS GENERAL INFORMATION

1.	Warranty Service or Parts	1-800-642-4328
2.	Purchase Replacement Parts	1-800-654-3545
3.	General Product Information	www.marleymep.com

Note: When obtaining service always have the following: 1. Model number of the product

2. Date of manufacture

3. Part number or description

470 Beauty Spot Rd. East

Bennettsville, SC 29512 USA

ECR35841

Part No. 5200-2184-003

7/03

Radiant Heater specifications

Marley Engineered Products offers a range of radiant heaters known for their efficiency, versatility, and innovative engineering. These heaters are designed to provide effective heating solutions for various applications, making them an ideal choice for both commercial and residential spaces.

One of the main features of Marley radiant heaters is their ability to deliver instant, even heat. Utilizing infrared technology, these heaters warm objects and people directly rather than heating the air, which leads to a more comfortable and efficient heating experience. This method reduces energy waste, making Marley heaters an environmentally friendly option.

The radiant heaters are engineered for durability and performance, with quality construction that ensures long-term reliability. Many models are constructed with corrosion-resistant materials, making them suitable for use in diverse environments, including wet or outdoor spaces. This durability is complemented by various mounting options, allowing for versatile installation, whether ceiling-mounted, wall-mounted, or portable.

In addition to their robust build, Marley radiant heaters come equipped with advanced control technologies. Many models offer adjustable temperature settings and programmable timers, enabling users to customize their heating schedules. Smart technology integration is also available in some units, allowing for connectivity with home automation systems for enhanced convenience and control.

Another significant characteristic of Marley radiant heaters is their silent operation. Unlike traditional heating systems that use blowers or fans, infrared heaters operate quietly, making them perfect for environments where noise can be a distraction, such as offices, libraries, or residential bedrooms.

Safety is a top priority in the design of Marley heaters. Many models feature built-in overheat protection, tip-over switches, and a robust design that minimizes the risk of accidents. This emphasis on safety ensures peace of mind for users, especially in spaces with children or pets.

In summary, Marley Engineered Products radiant heaters provide a combination of efficiency, durability, advanced technology, and safety features. Ideal for a wide range of applications, these heaters not only enhance comfort but also contribute to reducing energy costs, making them a wise investment for those seeking effective heating solutions. With their innovative design and performance-driven engineering, Marley radiant heaters stand out in the market as reliable and efficient heating options.