Monessen Hearth SBV500, SBV400, BBV400 Lighting Pilot, Never check for gas leak with open flame

Page 25
Never check for gas leak with open flame!

OPERATING INSTRUCTIONS

LIGHTING PILOT FOR THE FIRST TIME

APPROVED LEAK TESTING METHOD

You may check for gas leaks with the following methods only:

Soap and water solution

An approved leak testing spray

Electronic sniffer

DANGER

Never check for gas leak with open flame!

 

 

 

WARNING

If using a soap and water

 

 

solution to test for leaks,

 

DO NOT spray solution onto

 

control body.

 

 

NOTE: Remove any excessive pipe compound from the connections. Excessive pipe compound can set off electronic sniffers.

Check for gas leaks in each of the following locations:

• Pipe from the gas supply line connection to the gas valve

Burner connections

• Field made joints / gas shutoff valve

Pilot

Factory made joints

• Each joint or connection

All joints on valve and control body

LIGHTING PILOT

WARNING

The control has an interlock device that does not allow the lighting of the fireplace up to the moment the safety device of the flame has not interrupted the gas flow. After that period of time (when the magnet is closed), it is possible to start the lighting operation.

The gas control knob is designed to be operated by hand. DO NOT use any tools during this operation. Damaged knobs may result in serious injury.

1.Depress and turn knob counterclockwise LIGHTING PILOT to pilot position.

2.Depress fully and hold pilot gas knob. The elec- tronic ignitor will automatically ignite the pilot. Keep knob fully depressed for a few seconds. Release and check that pilot continues to burn.

If the pilot does not stay lit, repeat steps 1 and 2.

 

O

 

T

N

 

 

 

 

O

 

 

 

L

 

 

 

I

 

 

 

P

 

 

 

 

F

 

 

P

F

 

 

O

 

I

 

 

 

 

L

 

 

 

O

 

 

 

T

Figure 23 - Pilot Position

Continued on next page

62D4036

25

Image 25
Contents READ BEFORE INSTALLING. SAVE THESE INSTRUCTIONS INSTALLATION AND OPERATING INSTRUCTIONSB-VENTSERIES NATURAL VENT GAS FIREPLACEMonessen Hearth Systems Fireplace CONTENTSIMPORTANT SAFETY INFORMATION California Health and Safety Code Sec IMPORTANT SAFETY INFORMATIONNever connect unit to private non-utilitygas wells. This gas isPRODUCT SPECIFICATIONS PRODUCT FEATURES AND CODE APPROVALCODE APPROVAL Figure 1 - BBV/SBV FireplaceINSTALLING ABOVE 2000 FEET PRE-INSTALLATIONINFORMATIONORIFICE SIZES, PRESSURES AND BTUs BEFORE YOU STARTCorner Installation PRE-INSTALLATIONINFORMATIONInside Chase Installation Recessed InstallationPRE-INSTALLATIONINFORMATION FIREPLACE DIMENSIONS BBV400PRE-INSTALLATIONINFORMATION FIREPLACE DIMENSIONS SBV400 and SBV500FIREPLACE LOCATION PRE-INSTALLATIONINFORMATIONCLEARANCES Framing 1/2 Nail Flange Screws 5/8 Nail Flange SECURING FIREPLACE TO FLOOR OR FRAMINGScrews 1/2 Nail Flange Framing 1/2 Nail Flange 5/8 Nail Flange ScrewsVENT INSTALLATION INSTALLATION INFORMATIONINSTALLATION PLANNING VENT INSTALLATION“B” VENT PIPE B-VENTPIPE SIZINGFIRESTOP INSTALLATION VENT INSTALLATIONFigure 9 - Installing Firestop In Attic Figure 10 - Installing Firestop In CeilingOutside Air Runs COMBUSTION AIR ASSEMBLY FIREPLACE INSTALLATION Figure 17 - Gas Connection FIREPLACE INSTALLATIONDo not use open flame to check for CHECKING GAS PRESSUREgas leaks Figure 18 - Gas Pressure Check at Gas ValveELECTRICAL WIRING ELECTRICAL INSTALLATIONREMOTE WALL MOUNTED SWITCH wall switchELECTRONIC PILOT IGNITION WIRING ELECTRICAL INSTALLATIONREMOTE WALL SWITCH OPTIONAL DC REMOTE SYSTEMSROCK WOOL PLACEMENT FINAL INSTALLATIONLOG PLACEMENT LAVA ROCK AND EMBER PLACEMENTLIGHTING PILOT FOR THE FIRST TIME FOR YOUR SAFETY READ BEFORE LIGHTINGOPERATING INSTRUCTIONS Never check for gas leak with open flame LIGHTING PILOTLIGHTING PILOT FOR THE FIRST TIME OPERATING INSTRUCTIONSTO TURN OFF GAS LIGHTING BURNEROPERATING INSTRUCTIONS FOR YOUR SAFETY READ BEFORE LIGHTING LIGHTING ELECTRONIC IGNTO TURN OFF GAS OPERATING INSTRUCTIONSBURNER, PILOT AND CONTROL COMPARTMENT CLEANING AND MAINTENANCEFigure 29 - Pilot Flame Figure 30 - Burner Flame AppearanceNOTE Do not use cleaning fluid to clean logs CLEANING AND MAINTENANCEVENT SYSTEM LOGSFIREBOX COMPONENTS ILLUSTRATED PARTS LISTS16 2 4a 4b 4c 5 62D4036Optional Field Installed Accessories ILLUSTRATED PARTS LISTSItem Description Qty BBV400/400BBV SBV400/400SBV SBV500/500SBVSTANDING PILOT - MILLIVOLT CONTROL ILLUSTRATED PARTS LISTS62D4036 STANDING PILOT - MILLIVOLT CONTROL ILLUSTRATED PARTS LISTSELECTRONIC IGNITION ILLUSTRATED PARTS LISTS1 3 62D4036Description ILLUSTRATED PARTS LISTSSTANDING PILOT IGNITION TROUBLESHOOTINGNOTE If Module goes into lockout, reset system TROUBLESHOOTINGNOTE If Module goes into lockout, reset system excessive temperaturesGENERAL TROUBLESHOOTING TROUBLESHOOTINGNOTE REGARDING VENT FREE PRODUCTS NOTE REGARDING VENTED PRODUCTSCARBON MONOXIDE DETECTOR REQUIREMENTS TIONS.” SPECIAL REQUIREMENTS CONTINUED62D4036 Technical Services Monessen Hearth Systems LIMITED LIFETIME WARRANTY POLICY149 Cleveland Drive Paris, Kentucky
Related manuals
Manual 40 pages 17 b

SBV400, BBV400, SBV500 specifications

The Monessen Hearth SBV400, SBV500, and BBV400 are premium gas fireplaces that combine elegant design with state-of-the-art technology to enhance any living space. Each model offers a unique blend of features aimed at addressing diverse heating needs while boasting impressive aesthetic appeal.

The SBV400 and SBV500 models are particularly noted for their distinctive contemporary styling. These vented gas fireplaces provide a clean and efficient heat source while serving as a stunning focal point in any room. The SBV400 delivers efficient warmth with an output of up to 32,000 BTUs, while the SBV500 impresses with a powerful maximum output of 40,000 BTUs, catering to larger spaces and providing superior heat distribution. Both models come equipped with a standard remote control, allowing you to adjust the flame height and temperature with ease, ensuring maximum comfort at your fingertips.

The technology behind these fireplaces includes a unique burner system that produces a stunning, realistic flame pattern. This advanced burner technology not only enhances the visual appeal but also promotes optimal fuel efficiency. The models are designed to utilize either natural gas or propane, offering versatility based on your needs. Additionally, an optional fan kit can be incorporated into these fireplaces to further enhance their heating capabilities, helping to circulate warm air throughout the room effectively.

In contrast, the BBV400 is designed with a more traditional aesthetic, featuring a classic fireplace look that suits a variety of décor styles. This model also boasts significant heating capabilities with a maximum output of 32,000 BTUs, ensuring warmth and comfort during colder months. Its minimalist design, combined with the variety of available face options and decorative media, allows homeowners to customize the look of their fireplace to meet their personal preferences.

All three models feature built-in safety measures, including an automatic shut-off system and an insulated firebox, ensuring peace of mind during operation. The easy-to-use control panel and optional wall switch further enhance user convenience.

Whether you choose the modern SBV series or the traditional BBV400, Monessen Hearth fireplaces are engineered to provide not only reliable performance but also an elegant addition to your home. With their exceptional features, cutting-edge technology, and stylish designs, these fireplaces are the perfect solution for anyone seeking both functionality and beauty in their heating options.