Magnadyne M9900CD manual Display Button, Setting the Clock

Page 8

9900CD Manual 1/20/03 12:19 PM Page 8

Specialty Features (Continued)

Display Button:

When the unit is on, press the “Display” (11) but- ton at any time to display the clock indefinitely. If you tune to another radio station, the frequency will be displayed for 5 seconds, then will switch back to the clock. Pressing the “Display” button a second time will display the radio frequency indefinitely. This procedure operates the same in CD mode.

Setting the Clock:

To set the clock, press the “Power” button (1) to turn the unit on and perform the following procedure:

1.Press and hold the “DISPLAY” button (11) until the display begins to flash.

2.Use the “Clock Setting” knob (3) to adjust the hours (When selecting hours note the AM or PM indicator) and minutes as indicated on the con- trol. Rotate the knob left to adjust minutes and rotate right to adjust hours.

Minutes

Hours

8

Image 8
Contents Installation Operations Manual Introduction Location and Function of Controls at a GlanceLocation and Function of Controls at a Glance Programming the Unit Listening to the RadioSound Controls CD Operation Weather Band Radio OperationCD Changer Control Optional Specialty Features Reset ButtonMode Button Auxiliary InputSetting the Clock Display ButtonInstallation Procedure Installation Speaker ConnectionAuxiliary Connection CD Changer ConnectionWarranty ONE 1 Year Limited Warranty