Magnadyne M9999 manual Auxiliary Input, Specialty Features, Reset Button

Auxiliary Input

1.Press the “MODE” (13) button until the display reads “AUX” which indicates that the auxiliary unit is playing through the M9999 (Figure M).

2. All tonal features (Volume, Bass, Treble, Balance and Fader) are active when the auxiliary source is playing.

Figure M (Auxiliary Display)

Specialty Features

Reset Button:

If by chance the function of the front panel becomes “Locked-Up” (front panel buttons don’t function at all) or the display area become unreadable, use a ballpoint pen to press the “Reset” button (Figure N).

Pressing the reset button clears all memory and resets the display to it’s DEFAULT settings. All recall buttons will lose their programming and the clock will lose the set time. All these functions will have to be reprogrammed.

☛

Figure N (Reset Button)

Mode Button:

The “MODE” button (13) is used to select between the sound sources: Radio, CD, CD Changer or Auxiliary Source (Figures O).

Example: If a CD has been inserted, repeated press- ing of the “Mode” button will change the sound out- put from one source to another. The source that is playing will be indicated in the display area.

☛

Figure O (Mode Button)

Clock Button:

When the unit is on, press the “Clock” (11) button at any time to display the clock indefinitely (Figure P). If you tune to another radio station, the frequency will be displayed for 5 seconds, then will switch back to the clock. Pressing the “Clock” button a second time will display the radio fre- quency indefinitely. This procedure operates the same in CD mode.

☛

Figure P (Clock Button)

7