Monessen Hearth 424WBST manual Chimney Components, RLTSK8

424WBST Designer Woodburning Fireplaces

Chimney Components

U.S.

Component	Description	Model Number
Round Top Termination	Round termination to be used with SK8 chimney	RLTSK8
	system. (Flashing not included.)
Long Round Top	Round top to be used with a chase installation	RLTSK8L
Termination	utilizing SK8 chimneysystem.
Knock-down Shroud -	Black pyramid knock-down shroud used for	PKDSBL
Pyramid	chase installations with any RLT round top
	termination. Gives appearance of a pyramid cap.
Knock-down Shroud -	Black square knock-down shroud used for	SKDSBL
Square	chase installations with any RLT round top
	termination. Gives appearance of a square cap.	Adaptor required
Square Termination	Top housing with simulated brick pattern.	T20B
	(Red, Tan or Black) Proper adapter must be
	used. Includes flashing.
Adapter	Required adapters for T20B top housing.	CF8CA (SK8)
Housing Extensions	Extends Square Termination on steep pitched roofs.	202036
Flashing	Metal finishing required around Contemporary	8-6-12 with 8" flue:
	Termination to prevent rain leakage.	0-6/12 pitch
		8-12-12 with 8" flue:
		6/12-12/12 pitch
Square Termination	Top housing of simulated brick pattern	T20B
	available in red, tan or white. Appropriate
	adapter required. Flashing included.
SK8	Pipe used to build 8" SK8 flue systems.	SK81 (1' Long)
Chimney Sections		SK818 (1¹⁄₂' Long)
		SK83 (3' Long)
		SK84 (4' Long)
Chimney Elbows	Elbow used to create an offset in a	SK830 / 2 (SK8)
	chimney system. Only 30° elbows available.
	Packaged 2 per carton (offset and return).
Firestop	Required at each floor level of chimney	SKFS2A — SK8
	installation. (Plus attic on multi-story installation.)	(8" straight flue)
		SKFS6A — SK8
		(8" 30° inclined flue)
Chimney Support	Used to support chimney for each of: 20' vertical	SKCS8 - SK8
	height and 6' of angled chimney run.
Attic Insulation Shield	Used to prevent insulation from coming in contact	AIS-SK - SK8
	with the chimney system.

22 87D1506